Bedienungsanleitung Kenwood TM-D710GA (Seite 64 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-19

SETTING SOUND

Enter Menu mode and access Menu 624.

■ RX Beep Type <RX BEEP>

This transceiver beeps each time it receives any type of

APRS packets.

Selection Operation

OFF

The APRS beep tone does not sound.

MESSAGE

ONLY

Beep sounds only when a message is

received at your station address.

MINE

Beep sounds when a message is received at

your station address and your transmitted data

is received by a digipeater.

ALL NEW

Beep sounds when a message is received at

your station address and new packet data is

received.

ALL

Beep sounds when a message is received

at your station address and duplicate data or

invalid data is received.

■ TX Beep <TX BEEP>

When a beacon containing your station position information

(My position information) is transmitted in a manner other

than manually, you can select whether or not it emits a beep

sound.

[OFF]: A beep does not sound.

[ON]: A beep sounds when a beacon is transmitted using

the PTT switch or when it is automatically transmitted. When

auto-reply message sends a response, a beep (morse code

A) will sound.

Note: Depending on the congestion level of the transmission channel, the

transmission beep sound may be delayed when using the internal TNC

DCD sense function.

■ Special Call Sound <SPECIAL CALL>

This function emits a special call sound when data is received

at My station address. Set the callsign of the stations from

which you want to receive special call notiﬁ cations.

■ APRS Voice Announce <APRS VOICE>

When using an optional VGS-1 unit, you may select ON.

Each time you receive a message addressed to you, the

transceiver announces the callsign of the sender. If the initial

character of the message is %, the transceiver announces

the subsequent characters one by one.

SETTING INTERRUPT DISPLAY

Enter Menu mode and access Menu 625.

■ Display Area <DISPLAY AREA>

Selects the Display area.

[ENTIRE ALWAYS]: The received new data, duplicate data,

and My station data information appears on the full display,

other data information appears only at the top of the display.

[ENTIRE]: The received new data information appears on the

full display, other data information appears only at the top of

the display.

[HALF]: The received new data information appears on the

left half of the display only, other data information appears

only at the top of the display.

[OFF]: The received new data information appears only at the

top of the display.

Note: When an emergency message or a message designated for your station

is received, the received data information appears on the full display, even if the

display method is set to [HALF] or [OFF]. When a status message is received, it

is displayed on half of the display.

■ Automatic Brightness <AUTO BRIGHTNESS>

When ON is selected and My station address message is

received, the backlight turns on (2 step).

■ Change Color <CHANGE COLOR>

When ON is selected and My station address message is

received, the backlight color changes.

■ Interrupt Time <INTERRUPT TIME>

Set the duration to display an indication for when new data

is received. If you select “Inﬁ nite”, the indication cannot be

canceled.

The Interrupt time can be set to 3, 5, 10 seconds or

“INFINITE”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info