Bedienungsanleitung Kenwood TM-D710GE (Seite 12 von 77) (Englisch)

606708

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

MEMORY CH-2

STORING ODD-SPLIT REPEATER FREQUENCIES

Some repeaters use a receive and transmit frequency pair

with a non-standard offset. To access those repeaters, store

two separate frequencies in a memory channel. You can then

operate on those repeaters without changing the offset frequency

you stored in the menu.

1 Set up a simplex channel by following steps 1 to 6 of

“STORING SIMPLEX AND STANDARD REPEATER

FREQUENCIES”, above.

2 Press [VFO] to enter VFO mode.

3 Rotate the Tuning control to select your desired transmit

frequency.

• Additionally, you can press the microphone [UP]/[DWN] keys to

select a frequency.

4 Set up any additional data desired for the transmit frequency.

• Tone ON/OFF, Tone frequency, CTCSS ON/OFF, CTCSS

frequency, DCS ON/OFF, DCS code, etc.

5 Press [F].

• A memory channel number appears.

6 Rotate the Tuning control to select your desired channel

number.

• Additionally, you can press the microphone [UP]/[DWN] keys to

select a channel.

7 Press [PTT], [M.IN] to store the data in the selected Memory

channel.

■ Call Channel Memory (Odd-Split)

The Call channel can be used to store any frequency and

related data that you will recall often. You may want to

dedicate the Call channel as an emergency channel within

your group.

To store an odd-split frequency and related data as the Call

channel instead of in a Memory channel, after step 6 (above),

press [PTT], [C.IN].

Note:

◆ You cannot set the transmission and reception frequencies on different

bands.

◆ You cannot set a different frequency step size for the transmission and

reception frequencies.

◆ You cannot store the transmit offset status and Reverse status in an odd-

split Call channel.

RECALLING A MEMORY CHANNEL

1 Press [MR] to enter Memory Recall mode.

2 Rotate the Tuning control to select your desired Memory

channel.

• Additionally, you can press the microphone [UP]/[DWN] keys to

select a channel, or you can enter a channel number using the

microphone keypad.

■ Memory Recall Method

The transceiver Menu also provides you with the option to

recall Memory channels with stored frequencies in your

current band, or all Memory channels:

1 Enter Menu mode and access Menu 201.

2 Set the recall method to CURRENT (current band) or ALL

BANDS (all bands).

• CURRENT allows you to recall only those memory channels

that have stored frequencies within the current band. ALL

allows you to recall all programmed memory channels.

• When the recalled memory channel is an AM channel, you

cannot recall on the B band.

Frequency ranges:

• 118 MHz: 118 ~ 135.995 MHz

• 144 MHz: 136 ~ 199.995 MHz

• 220 MHz: 200 ~ 299.995 MHz

• 300 MHz: 300 ~ 399.995 MHz

• 430/440 MHz: 400 ~ 523.995 MHz

• 1200 MHz: 800 ~ 1299.990 MHz

CLEARING A MEMORY CHANNEL

1 Press [MR] to enter Memory Recall mode.

2 Rotate the Tuning control to select your desired Memory

channel.

• Additionally, you can press the microphone [UP]/[DWN] keys to

select a channel, or you can enter a channel number using the

microphone keypad.

3 Turn the transceiver power OFF.

4 Press [MR] + Power ON.

• A conﬁ rmation message appears on the display.

5 Press the Tuning control to clear the Memory channel.

• To exit without clearing the channel, press [ESC].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GE Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info