Bedienungsanleitung Kenwood TS-480SAT (Seite 60 von 104) (Englisch)

511243

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

11 MEMORY FEATURES

■ Memory Scroll

1 Press [QMI/ M.IN] (1 s) to enter Memory Scroll

mode.

• The memory channel that was last selected

appears.

2 Turn the MULTI control, or press Mic [UP]/

[DWN] to step through the memory channels.

•You can also change channels by entering a

2-digit number. Press [8], [9] for example.

3 To exit Memory Scroll mode, press

[MTR/ CLR].

• The transceiver re-displays the memory

channel or VFO frequency that was

selected before you activated Memory

Scroll.

Note:

◆

While the transceiver is in Memory Scroll mode, you can

operate the following controls and keys only:

[QMI/ M.IN]

[MTR/ CLR]

, numeric keys (

[0]

[9]

), Mic

[UP]

[DWN]

Mic

[PTT]

control,

SQL

control,

MULTI

control and

[ ]

(POWER).

◆

Do not press

[QMI/ M.IN]

again after entering Memory Scroll

mode. Pressing

[QMI/ M.IN]

results in over-writing the

current VFO data to the memory channel you selected.

■ Temporary Frequency Changes

After retrieving frequencies and associated data in

Memory Recall mode, you can temporarily change

the data without overwriting the contents of the

memory channel.

1 Access Menu No. 07 and select “on”.

• Skip this step when changing only the

associated data (not the frequency).

2 Recall a memory channel.

3 Change the frequencies and associated data.

• Use only the Tuning control to select a

frequency.

4 If necessary for future use, store the changed

data in another memory channel. Refer to

“Channel ➡ Channel Transfer” {below}.

Note:

If Menu No. 07 is selected “on”, the frequency of the split-

memory channel can be changed while using the TF-SET

function.

MEMORY TRANSFER

■ Memory \ VFO Transfer

After retrieving frequencies and associated data

from Memory Recall mode, you can copy the data

to the VFO. This function is useful, for example,

when the frequency you want to monitor is near

the frequency stored in a memory channel.

1 Recall the desired memory channel {page 51}.

2 Press [QMR/ M

sVFO] (1 s).

• When a simplex channel is recalled, the

data is copied to VFO A or VFO B,

depending on which VFO was used to recall

the channel.

• When a split channel is recalled, the RX

data is copied to VFO A and the TX data is

copied to VFO B.

Note:

Pressing

[QMR/ M

VFO] (1 s)

after temporarily changing

the retrieved data copies the new data to the VFO.

■ Channel \ Channel Transfer

You can also copy channel information from one

memory channel to another. This function is

useful when storing frequencies and associated

data that you temporarily change in Memory

Recall mode.

1 Recall the desired memory channel {page 51}.

2 Press [QMI/ M.IN] to enter Memory Scroll

mode.

•To exit Memory Scroll mode, press

[MTR/ CLR].

3 Select the memory channel where you would

like the data copied, using the MULTI control.

4 Press [QMI/ M.IN] (1 s).

98~00lennahC a 98~00lennahC

ycneuqerfXR

ycneuqerfXT

XRrofedoM

XTrofedoM

petsycneuqerfXR

petsycneuqerfXT

ycneuqerfenoT

ycneuqerfSSCTC

SSCTC/enoT

sutatsFFO/NO

SSCTC/enoT

sutatsFFO/NO

emaNyromeM

lennahCyromeM

FFO/NOtuokcoL

lennahCyromeM

FFOtuokcoL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-480SAT Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-480SAT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info