Bedienungsanleitung Kenwood TS-480SAT (Seite 62 von 104) (Englisch)

511243

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

11 MEMORY FEATURES

■ Programmable VFO

Using the start and end frequencies that you

stored in channels 90 to 99, Programmable VFO

restricts the frequency range that you can tune

with the Tuning control. One application of this

function is to help you operate within the

authorized frequency limits of your license.

1 Press [A/B / M/V] (1 s) to enter Memory Recall

mode.

2 Turn the MULTI control, or press Mic [UP]/

[DWN] to select a memory channel from 90 to

99.

•You can also select a channel by entering a

2-digit number. Press [ENT], [9], [0] for

example.

Now you can only tune from the start frequency to

the end frequency, using the Tuning control.

Note:

Pressing Mic

[UP]

[DWN]

or turning the

MULTI

control

changies the memory channel number while in Programmable

VFO mode.

MEMORY CHANNEL LOCKOUT

You can lock out memory channels that you prefer

not to monitor during Memory Scan. Memory Scan is

described in the next chapter {page 58}.

1 Press [A/B / M/V] (1 s) to enter Memory Recall

mode.

2 Turn the MULTI control, or press Mic [UP]/ [DWN]

to select the desired memory channel.

•You can also select a channel by entering a

2-digit number. Press [ENT], [3], [4] for

example.

3 Press [ENT] (1 s).

•A dot appears beside the right-most digit of the

memory channel number to indicate the

channel has been locked out.

• Pressing [ENT] (1 s) toggles between adding

and removing the channel from the scan list.

ERASING MEMORY CHANNELS

If there are memory channels that you will not recall

in the future, you may prefer erasing the contents of

those channels.

1 Press [A/B / M/V] to enter Memory Recall mode.

2 Turn the MULTI control, or press Mic [UP]/ [DWN]

to select the desired memory channel.

•You can also select a channel by entering a

2-digit number. Press [ENT], [3], [4] for

example.

3 Press [MTR/ CLR] (1 s).

•A long beep sounds to confirm that the channel

data has been erased.

MEMORY CHANNEL NAME

You can assign a name to each memory channel. A

maximum of 8 alpha-numeric characters can be

stored.

1 Press [A/B / M/V] (1 s) to enter Memory Recall

mode.

2 Turn the MULTI control, or press Mic [UP]/ [DWN]

to select a memory channel.

3 Press [QMR/ M

sVFO].

4 Turn the MULTI control to select the desired

alpha-numeric character. You can move the

cursor to the left by pressing [ ], or to the right by

pressing [ ]. Press [CL] to erase the character

at the cursor.

Note:

You cannot name the Quick Memory channels.

5 After selecting all the necessary characters for the

memory channel name, press [QMR/ M

sVFO] to

store the name.

6 When you recall a memory channel with a name,

the name is displayed on the sub-display along

with the memory channel number {page 51}.

Available alpha-numeric characters

ABCDEFGH I JKLMN

OPQRSTUVWXYZ

+ –/0123456789

“SP” represents a space character.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-480SAT Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-480SAT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info