Bedienungsanleitung Kenwood TS-870S (Seite 51 von 104) (Englisch)

606693

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

USB

AGC AUTO TONE

XIT

USB

AGC AUTO TONE

XIT

USB

VOX AGC AUTO

7 OPERATING AIDS

TRANSMITTING

VOX (VOICE-OPERATED TRANSMIT)

VOX eliminates the necessity of manually switching to

the transmit mode each time that you want to transmit.

The transceiver automatically switches to transmit when

the VOX circuitry senses that you have begun speaking

into the microphone.

When using VOX, get into the habit of pausing between

thoughts to let the transceiver drop back to receive

briefly. You will then hear if anybody wants to interrupt,

plus you will have a short period to gather your thoughts

before speaking again. Your listener will appreciate

your consideration as well as respect your more

articulate conversation.

Press [VOX] to toggle the VOX function ON or OFF.

•“VOX” lights when the function is ON.

■ Microphone Input Level Adjustment

To enjoy the VOX mode, take time to set the gain of

the VOX circuit to the correct level.

1 Select a voice mode, switch ON the VOX

function, and begin speaking into your

microphone using your normal level of voice.

2 Access Menu No. 28 (VOX.GAIN), then select

different settings (default is 4) until the transceiver

reliably switches to transmit each time you speak.

• The best setting will allow the transceiver to

switch between receive and transmit;

however, background noises near your

operating position should not falsely switch

the transceiver.

• This Menu item is configurable even if the

VOX function is OFF or while you are

transmitting.

Note:

This transceiver does not have an ANTI-VOX control. DSP is

able to automatically lower the input sensitivity for received audio that

is output from the speaker.

■ Delay Time Adjustment

1 Select a voice mode, switch ON the VOX

function, and begin speaking into your

microphone using your normal level of voice.

2 Adjust the DELAY control so that the transceiver

changes back to receive a brief time after you

stop talking.

• The DELAY control has a range from

150 ~ 2700 ms. Each step equals 10.6 ms.

Note:

Setting the delay time by computer overrides any setting

of the

DELAY

control. The control then has no effect. To restore

functionality to the

DELAY

control, turn the control. The newly

selected setting becomes effective.

TRANSMIT INHIBIT

Transmit Inhibit prevents the transceiver from being

placed in the transmit mode. No signals can be

transmitted if this function is ON. When the transceiver

is inhibited from transmitting, the graduations on the

PWR meter go out as a visual reminder.

• TX Inhibit OFF: Transmissions are possible.

• TX Inhibit ON: Transmissions are not possible.

Switch the function ON or OFF via Menu No. 27

(TX INH). The default is OFF.

XIT (TRANSMIT INCREMENTAL TUNING)

Similar to RIT, XIT provides the ability to change your

transmit frequency by ±9.99 kHz in steps of 10 Hz

without changing your receive frequency. If the Fine

Tuning ([FINE]) function is ON, the step size is 1 Hz.

1 Press [XIT].

•“XIT” and the XIT frequency display appear.

2 Press [CLEAR] to reset, if required, the XIT offset

to 0.

3 Turn the RIT/XIT control to change your transmit

frequency.

4 To cancel the XIT function, press [XIT].

Note:

The frequency shift set by the

RIT/XIT

control is also used by

the RIT function. Therefore, changing or clearing the XIT frequency

also affects the RIT frequency.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-870S Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-870S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info