Bedienungsanleitung Kenwood TS-870S (Seite 75 von 104) (Englisch)

606693

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

MAINTENANCE

SERVICE NOTE

Dear YL/OM,

If you desire to correspond on a technical or operational

problem, please make your note short, complete, and to

the point. Help us help you by providing the following:

1 Model and serial number of equipment

2 Question or problem you are having

3 Other equipment in your station pertaining to the

problem

4 Meter readings

5 Other related information (Menu setup, mode,

frequency, button sequence to induce

malfunction, etc.)

CAUTION:

Do not pack the equipment in crushed newspapers for

shipment! Extensive damage may result during rough handling or

shipping.

Note:

◆

Record the date of purchase, serial number and dealer from

whom the transceiver was purchased.

◆

For your own information, retain a written record of any

maintenance performed on the transceiver.

◆

When claiming warranty service, please include a photocopy of

the bill of sale, or other proof-of-purchase showing the date of

sale.

CLEANING

The buttons, controls and case of the transceiver are

likely to become soiled after extended use. Remove the

controls from the transceiver and clean them with a

neutral detergent and warm water. Use a neutral

detergent (no strong chemicals) and a damp cloth to

clean the case.

GENERAL INFORMATION

Your transceiver has been factory aligned and tested to

specification before shipment. Under normal

circumstances, the transceiver will operate in

accordance with these operating instructions. All

adjustable trimmers, coils and resistors in the

transceiver were preset at the factory. They should only

be readjusted by a qualified technician who is familiar

with this transceiver and has the necessary test

equipment. Attempting service or alignment without

factory authorization can void the transceiver warranty.

When operated properly, the transceiver will provide

years of service and enjoyment without requiring further

realignment. The information in this section gives some

general service procedures requiring little or no test

equipment.

SERVICE

If it is ever necessary to return the equipment to your

dealer or service center for repair, pack the transceiver

in its original box and packing material. Include a full

description of the problems experienced. Include both

your telephone number and fax number (if available)

along with your name and address in case the service

technician needs to call for further explanation while

investigating your problem. Don’t return accessory

items unless you feel they are directly related to the

service problem.

You may return your transceiver for service to the

authorized KENWOOD Dealer from whom you

purchased it or any authorized KENWOOD service

center. A copy of the service report will be returned with

the transceiver. Please do not send subassemblies or

printed circuit boards. Send the complete transceiver.

Tag all returned items with your name and call sign for

identification. Please mention the model and serial

number of the transceiver in any communication

regarding the problem.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-870S Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-870S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info