683161

Kenwood TS-890S Seite 154

154
Zoom out
Zoom in
Vorherige Seite
1/196
Nächste Seite
●
This transceiver does not support IPv6.
●
This transceiver supports ping and other ICMP
responses.
●
The Ethernet standard used on this transceiver is
100BASE-TX. Use a commercially available cable that
is Category 5 (Cat5) or higher.
●
When connecting to a hub or broadband router, make
use of a commercially available straight cable.
●
Turn off the power of this transceiver and the device to
connect to before connecting the cable.
●
Even when the IP address is acquired automatically, IP
address cannot be configured in an environment where
a DHCP server is not used.
●
When the IP address is acquired automatically, the IP
address, subnet mask, default gateway, primary DNS
server and secondary DNS server are grayed out and a
parameter cannot be input.
●
When an IP address is automatically acquired and
configured for this transceiver, the configured IP address
is displayed in the IP address setting.
●
Setting DHCP to ON updates the parameter. If an
address is not acquired, the address field will remain
blank.
●
The address may not be acquired immediately after
DHCP is set to ON.
●
Even when the IP address is configured while DHCP is
OFF, this IP address will be displayed when DHCP is set
to ON.
Viewing the MAC Address
The MAC address of this transceiver which is necessary for its
operation via LAN can be identified in this menu item.
Check LAN Menu [6]
“MAC Address”.
The MAC address of this transceiver can be identified here.
This menu item is intended for viewing only, and the setting in
LAN Menu [6] “MAC Address” cannot be altered.
KNS Operation
KNS (KENWOOD NETWORK COMMAND SYSTEM) is a
collective term that refers to the system for remotely operating a
KENWOOD transceiver via the network such as the Internet or
LAN. Operation using this system is referred to as “KNS
operation”.
●
The ARCP-890 and other related programs for remote
operations, and “TS-890S KENWOOD NETWORK
COMMAND SYSTEM Setting Manual” can be
downloaded from the URL below.
http://www.kenwood.com/i/products/info/amateur/
software_download.html
●
This manual describes only the explanation on the areas
of the transceiver configuration. For details on specific
configurations, please refer to “TS-890S KENWOOD
NETWORK COMMAND SYSTEM Setting Manual”.
System Configuration Overview
Basic Configuration for Remote Operation through the Internet
To operate the TS-890S remotely through the Internet using KNS,
configure the system as shown in Figure 1.
.
TS-890S
Remote PC with
ARCP-890
LAN
Connection
Broadband
Router
Broadband
Router
Internet
Figure 1: Basic System Configuration
Under this configuration, the TS-890S performs login authentication
of the remote user (administrator and registered user) operating the
ARCP-890, followed by control command communication after
authentication is complete. Voice communication is carried out by
the TS-890S and ARCP-890 via the built-in VoIP.
●
Administrator refers to the owner of or person in charge
of managing the transceiver. Registered user refers to a
user other than the administrator who is authorized to
operate this transceiver remotely via KNS. A registered
user needs to be registered in advance by the
administrator to the KNS users list in the TS-890S.
Configuration when Using ARVP-10 or a Non-
KENWOOD VoIP for Voice Communication
When using ARVP-10 or a non-KENWOOD VoIP application
software program for voice communication, configure the system
as shown in Figure 2.
.
TS-890S
Voice
Host PC
VoIP Application
Remote PC with
ARCP-890
VoIP Application
LAN Connection
Hub
Broadband
Router
Broadband
Router
Internet
Figure 2: System Configuration when Using a Non-
KENWOOD VoIP Application
Under this configuration, voice communication between the
remote PC and host PC is carried out using the ARVP-10 or a non-
KENWOOD VoIP application software.
Voice communication between the host PC and the TS-890S is
carried out using the USB audio function (via USB cable
connection) or by extracting analog audio output signal (ANO) and
analog audio input signal (ANI) from the ACC 2 connector,
followed by connecting to the audio input/output connector of the
PC sound card. The configuration of components other than that
for voice communication are the same as the basic configuration.
15 NETWORK/KNS OPERATION
15-2
… 154 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TS-890S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TS-890S

Kenwood TS-890S Bedienungsanleitung - Deutsch - 196 seiten

Kenwood TS-890S Bedienungsanleitung - Holländisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info