Bedienungsanleitung Kenwood VR-715 (Seite 19 von 32) (Englisch)

596380

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Normal playback

Adjusting the sound

Adjusting the TONE (remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo

and analog stereo mode.

1 Press the TONE key to select the TONE mode.

2 Use the MULTI CONTROL knob or keys to select TONE ON/OFF.

3 When in TONE ON selection, press the TONE key for the following

displays.

BASS : Select this to adjust the low frequency range.

TREB : Select this to adjust the high frequency range.

4 Use the MULTI CONTROL knob or keys to adjust the sound

quality.

• The bass and treble levels are adjustable from -10 to +10 in 2 step

increments.

Once-touch low frequency emphasis (BASS BOOST)

(remote control only)

You can adjust the sound quality when the receiver is in the PCM stereo

and analog stereo modes.

Press the BASS BOOST key.

• Press the key once to select the maximum (+10) low frequency

emphasis setting.

• TONE will automatically be turned ON.

• This key does not function when the receiver is in the sound quality

or ambience effects adjustment mode. £~¶

Switching back the previous setting

Press the BASS BOOST key again.

Adjusting the LOUDNESS mode (remote control only)

You can adjust the Loudness function which controls the low volume

settings to maintain the music’s richness. The adjustment can be made

when the receiver is in the PCM stereo and analog stereo mode.

Press the LOUDNESS key to turn the LOUDNESS setting ON.

To cancel

Press the LOUDNESS key again so that the “LOUDNESS” indicator

goes off.

Muting the sound

The MUTE key lets you mute the sound of the speakers.

Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

• MUTE ON can also be deactivated by turning the volume control

knob.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is

turned ON during Dolby Digital and DTS playback and, when in PCM and

analog stereo mode

Press the ACTIVE EQ key for the following selections;

1 ACTIVE EQ MUSIC : Effective when listening to music.

(The ACTIVE EQ LED indicator lights up.)

2 ACTIVE EQ CINEMA : Effective when watching a movie.

(The ACTIVE EQ LED indicator lights up.)

3 ACTIVE EQ TV : Effective when watching TV.

(The ACTIVE EQ LED indicator lights up.)

4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.

(The ACTIVE EQ LED indicator goes off.)

• ACTIVE EQ function will not be available when REC MODE, AUTO

TUNING or PRESET MEMORY is ON and during 96kHz LPCM

playback.

Listening with headphones

1 Press the SPEAKERS ON/OFF key so that the speaker indicator

goes off.

• If you turn off all of the speakers when in surround mode, the

surround mode will be canceled as well, resulting in stereo playback.

2 Connect headphones to the PHONES jack.

PHONES

3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the

volume.

Make sure the SP indicator is turned OFF.

VOLUME

MUTE

BASS BOOST

MULTI

CONTROL

ACTIVE EQ

VOLUME CONTROL

PHONES

MULTI CONTROL

TONE

ACTIVE EQ

LOUDNESS

SPEAKERS ON/OFF

MUTE

*5337/16-20/EN 27/12/02, 1:05 PM19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-715 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info