Bedienungsanleitung Kenwood VR-715 (Seite 26 von 32) (Englisch)

596380

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

DVD 6-channel playback

(

For VR-715/KRF-V5070D only)

Using a DVD player or the like equipped with six (5.1) output channels and

the receiver, you can enjoy surround sound playback.

Connecting a DVD player which can decode the surround signal itself is

also acceptable.

DVD/6CH

INPUT SELECTORINPUT MODE

Preparations

• Connect your DVD player to the DVD/6CH jacks of the receiver.

• Turn on all other components that will be used.

• Complete “Preparing for surround sound”. ^

Select “DVD/6CH” as the input source.

Select "6CH INPT" by pressing the INPUT MODE key.

Start playback of the DVD software.

Adjust the volume.

• It is not possible to adjust the volume level or sound quality (SETUP,

SOUND, LISTEN MODE, ACTIVE EQ and TONE keys will not be

functional) of the channels separately when the receiver is in the

6CH INPUT mode. Adjust the volume with the controls of the DVD

player.

For the powered subwoofer, you can adjust the volume of the

subwoofer using the subwoofer’s own volume control.

Convenient functions

Adjusting the sound

You can make further adjustments to the sound while listening to

playback in the surround mode.

1 Press the SOUND key until the desired item appears in the

display.

Each time you press the button, the menu changes as follows:

Note that some items are not displayed in certain modes.

1 C (center speaker level adjustment)*

2 SR (right surround speaker level adjustment)*

3 SL (left surround speaker level adjustment)*

4 SW (subwoofer level adjustment)*

5 INPUT (input level adjustment - analog mode only) &

6 NIGHT (midnight mode ON/OFF - Dolby Digital mode only)

7 PANORAMA (panorama mode ON/OFF)**

8 DIMENSION (dimension adjustment)**

9 CENTER WIDTH (center width adjustment)**

* The adjustment is only temporary for the current input selection.

The value will return automatically to the original setup value

when the power is turned on/off or when the input selection is

changed.

** Pro Logic II Music mode only.

2 Use the MULTI CONTROL knob or keys to adjust the setting as

desired.

Midnight mode (Dolby Digital mode only)

When watching movies at night, you might not be able to raise the

volume as loud as normal. Midnight mode compresses the dynamic

range of previously specified heavy sound passage of the Dolby Digital

sound track (like scenes with sudden increases in volume) to minimize

the difference in volume between the scenes with heavy sound passage

and scenes with normal sound passage. This makes it easy to hear all of

the sound track, even when listening at low volumes.

1 Press the SOUND key repeatedly until “NIGHT” appears on the

display.

• This can be selected only if CD/DVD, DVD or DVD/6CH(VR-715/KRF-

V5070D only), or VIDEO2 is selected as the source and the listen

mode is set to “DOLBY DIGITAL.”

MULTI CONTROL

DIMMER

SOUND

MULTI

CONTROL

Ambience effects

*5337/23-27/EN 27/12/02, 1:06 PM26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-715 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info