Bedienungsanleitung Kenwood VR-715 (Seite 27 von 32) (Englisch)

596380

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

2 Use the MULTI CONTROL knob or keys to select the ON or OFF

setting.

• Some Dolby Digital software may not be compatible with the

Midnight mode.

Panorama mode (Pro Logic

Music mode only)

When listening to music, you will be able to enjoy the “wraparound”

sound effect when you adjust the panorama mode.

1 Press the SOUND key repeatedly until “PANORAMA” appears on

the display.

• The PANORAMA setting indication scrolls across the display.

“PANORAMA” will be scrolled from right to left.

2 Use the MULTI CONTROL knob or keys to select PANORAMA ON

or OFF.

1 ON : PANORAMA mode is ON.

2 OFF : PANORAMA mode is OFF.

Dimension mode (Pro Logic

Music mode only)

When listening to music with certain recordings, you will also be able to

achieve a suitable balance from all the speakers by adjusting the

dimension mode.

1 Press the SOUND key repeatedly until “DIMENSION” appears on

the display.

• The DIMENSION indication scrolls across the display.

2 Use the MULTI CONTROL knob or keys to adjust the soundfield

towards the rear or the front.

Soundfield is adjusted towards the front.

Soundfield is in neutral position.

Soundfield is adjusted towards the rear.

Center Width mode (Pro Logic

Music mode only)

Center Width adjustment allows you to enjoy an enhanced sound when

listening to music through center image from only center speaker, or left

and right speakers or various combinations adjustments.

1 Press the SOUND key repeatedly until “CENTER WIDTH” appears

on the display.

• The CENTER WIDTH indication scrolls across the display.

• When the center speaker is switched OFF, this mode will not

be effective.

2 Use the MULTI CONTROL knob or keys to adjust the left-center-

right output.

Center image will be heard from center speaker only.

Center image will be heard from left and right speakers only.

• When in other positions, center image from center speaker, left and

right speakers can be heard simultaneously with various

combinations.

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's

display. You might find this useful if you darken your room to watch

movies or listen to music.

Each time you press the DIMMER key, the display brightness

changes among the three available settings. Select the brightness

level you find most pleasing.

96kHz LPCM playback

The receiver is compatible with the 96kHz LPCM playback. To play a

96kHz DVD, set the listen mode to “STEREO”.

• In F-AUTO input mode, the listen mode will automatically be STEREO.

• When in D-MANUAL input mode (listen mode is not STEREO), “FS

96kHz” will appear in the display and no sound can be heard from the

speakers.

Press the LISTEN MODE key (the listen mode changes to the STEREO

mode) to output sound from the speakers.

Ambience effects

*5337/23-27/EN 27/12/02, 1:06 PM27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VR-715 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info