Bedienungsanleitung Kenwood VRS6200 (Seite 15 von 40) (Englisch)

510822

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Let’s play DVD video software

1 Press the MULTI CONTROL button to select "CUSTOM"

and press the SETUP key to select each of the speaker

setup items.

2 Press the MULTI CONTROL button to select the speaker

setup item and press the SETUP key.

Subwoofer : "SUBW" ] "ON" or "OFF"

Front speakers : "FRNT" ] "LRG" or "NML"

Center speaker : "CNTR" ] "LRG", "NML" or "OFF"

Surround speakers : "SURR" ] "LRG", "NML" or "OFF"

Back Surround speakers : "BS" ] "LRG", "NML" or "OFF"

Subwoofer re-mix setting : "REMIX" ] "ON" or "OFF"

"ON" : A subwoofer is connected.

Subwoofer re-mix setting mode to the receiver is ON.

"OFF" : No speaker is connected.

Subwoofer re-mix setting mode to the receiver is OFF.

"LRG" : Relatively large-size speakers.

"NML" : Normal-size speakers.

÷ When the subwoofer is set to "SUBW OFF", the front speaker

is set automatically to "FRNT LRG".

÷ Options "LRG" for the center speaker, surround speakers and back

surround speakers can be selected only when the front speakers

setting is "FRNT LRG". However, when the center speaker setting is

"CNTR NML", option "LRG" for the surround speakers cannot be

selected. Also, when the surround speaker setting is "SURR NML",

option "LRG" for the back surround speakers cannot be selected.

If you use another speaker system want a setup

according to it:

Subwoofer : "SUBW" ] "ON"

Front speakers : "FRNT" ] "LRG"

Center speaker : "CNTR" ] "NML"

Surround speakers : "SURR" ] "NML"

Back Surround speakers : "BS" ] "OFF"

Subwoofer re-mix setting : "REMIX" ] "ON"*

STEP 3

Play a disc on the DVD player.

Press the INPUT SELECTOR key to select "DVD".

Start playback of the DVD player.

For the operation, also refer to the instruction manual for your

DVD player.

÷ You can select various listen modes to enjoy surround

playback of various kinds of video software. º

Example: 5.1 ch Surround System

3 Press the SETUP key until "TEST TONE" is displayed,

press the MULTI CONTROL button to select "EXIT"

and then press the SETUP key.

÷ More detailed settings such as the volume level of each

speaker and distance to each speaker are also avail-

able. * ~ (

* When the subwoofer setting is "SUBW ON", front speakers setting

is "FRNT LRG" and a stereo source is played, the low frequencies may

be reproduced through the front speakers and no audio output from

the subwoofer in certain listen modes. In this case, the low-frequency

signal can be output from the subwoofer by selecting "REMIX ON" for

the subwoofer re-mix setting.

÷ When the speaker setting is set to "BS OFF", the DOLBY PRO

LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes

cannot be selected.

If "REMIX ON" is selected as the subwoofer re-mix setting,

the low frequencies are enhanced by adding the low fre-

quencies of other channels to the subwoofer channel or

adding the low frequencies of the subwoofer to other

channels depending on the speaker setup.

Subwoofer re-mix setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VRS6200 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood VRS6200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info