Bedienungsanleitung Kenwood VRS6200 (Seite 16 von 40) (Englisch)

510822

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Preparing for playback

RECEIVER

SETUP

ON/STANDBY MULTI CONTROL @/#

SOUND (

SETUP

SOUND (

TUNER, VIDEO, AUX,

GAME/F.AUX

MULTI CONTROL %/ﬁ

Speaker settings

To enable you to obtain optimum enjoyment from the receiver’s listening

modes, make sure to complete the speaker settings (Subwoofer, Front,

Center, Surround and Surround Back speakers) as described below.

Turn on the power to this receiver by pressing the

ON/STANDBY

key (or RECEIVER key).

If you want to use the remote control unit, press the TUNER,

VIDEO, AUX or GAME/F.AUX key on the remote to set it to the

receiver control mode.

Initiate the setup mode.

1 Press the SETUP key.

2 Use the MULTI CONTROL button (or the MULTI

CONTROL %/ﬁ keys) for the following displays.

1 "SP SETUP"

2 "TEST TONE"

3 "DISTANCE"

4 "LFE LEVEL"

5 "EXIT"

÷ While the main setup display is appeared, the setup mode

can be canceled by selecting "EXIT" and then pressing the

SETUP key.

The flow of the SETUP is as follows;

SP SETUP TEST TONE DISTANCE EXITLFE LEVEL

Front Left

Center

Front Right

Right Surround

HTB 1

HTB 2

HTB 3

Custom

Subwoofer

Front

Center

Surround

Back

MANUAL

AUTO

Subwoofer

Re-mix

Left Surround

Surround Back Left

Surround Back Right

Select a speaker system.

1 Select "SP SETUP" and press the SETUP key again so

that the speaker system indication "SP SYSTEM"

scrolls across the display.

2 Use the MULTI CONTROL button (or the MULTI

CONTROL %/ﬁ keys) to select the speaker system

setting.

1 "HTB 1": Select "HTB 1" if you use speaker system KS-2200HT*.

2 "HTB 2": Select "HTB 2" if you use speaker system KS-3200HT*,

KS-5200HT*, KS-7200HT*.

3 "HTB 3": Select "HTB 3" if you use speaker system KS-8200HT*.

4 "CUSTOM": Select to set up the speakers according to

the speaker system in use. (Speaker setup is required

every time after the speaker system is changed.)

* Model availability may differ depending on the country

and sales area.

÷ When the setting "HTB 1", "HTB 2" or "HTB 3" is selected, the

procedure skips to step 5.

÷ When you use a KENWOOD speaker system and select

"HTB 1", "HTB 2" or "HTB 3" set the speaker setup, the audio

will be corrected automatically according to the speaker

characteristics.

÷ When the speaker setting is set to "HTB 1", "HTB 2", "HTB 3 " or

"BS OFF" the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY

DIGITAL EX listen modes cannot be selected.

3 For general speaker setting, use the MULTI CONTROL

button (or the MULTI CONTROL %/ﬁ keys) to select

"CUSTOM", and press the SETUP key again.

÷ The subwoofer setting indication "SUBW" appears.

4 Use the MULTI CONTROL button (or the MULTI

CONTROL %/ﬁ keys) to select the appropriate

subwoofer setting.

1 "SUBW ON" :

When a subwoofer is connected.

2 "SUBW OFF" :

When no subwoofer is connected.

÷ The initial setting is "SUBW ON".

÷ When "SUBW OFF" is selected and the selection is

established by pressing the SETUP key in step 5 be-

low, the front speakers are set automatically to "FRNT

LRG" and the procedure jumps to step 8.

5 Press the SETUP key to accept the setting.

÷ The front speakers setting indication "FRNT" appears.

Continued to next page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VRS6200 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood VRS6200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info