Bedienungsanleitung Kenwood VRS6200 (Seite 33 von 40) (Englisch)

510822

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Convenient functions

Center Width mode

(Only when the input signal is a 2-channel signal in the DOLBY PRO

LOGIC

x MUSIC or DOLBY PRO LOGIC

MUSIC mode)

Center width adjustment allows you to enjoy an enhanced sound when

listening to music through center image from only center speaker, or left

and right speakers or various combinations adjustments.

1 Press the SOUND key repeatedly until the "CENTER

WIDTH" indication appears.

÷ When the center speaker is switched OFF, "CENTER WIDTH"

cannot be selected.

2 Use the MULTI CONTROL button (or the MULTI CONTROL

%/ﬁ keys) to adjust the left-center-right output.

Center image will be heard from center speaker only.

Center image will be heard from left and right speakers only.

÷ When in other position, center image from center speaker,

left and right speakers can be heard simultaneously with

various combinations.

Midnight mode

(DOLBY DIGITAL and DTS mode only)

When watching movies at night , you might not be able to raise the

volume as loud as normal. Midnight mode compresses the dynamic

range of previously specified parts of the DOLBY DIGITAL or DTS sound

track (like scenes with sudden increases in volume) to minimize the

difference in volume between the specified and non-specified parts. This

makes it easy to hear all of the sound track, even when listening at low

volumes.

1 Press the SOUND key repeatedly until the "NIGHT"

indication appears.

÷ This can be selected only if DVD, VIDEO or GAME (FRONT AUX)

is selected as the source and the listen mode is set to "DOLBY

DIGITAL" or "DTS".

2 Use the MULTI CONTROL button (or the MULTI CONTROL

%/ﬁ keys) to select the "NIGHT ON" or "NIGHT OFF"

setting.

1 "NIGHT ON"

2 "NIGHT OFF"

÷ The adjustment item is displayed for approximately 20 sec-

onds.

÷ Some DOLBY DIGITAL or DTS software may not be compat-

ible with the Midnight mode.

Display dimmer adjustment

The dimmer function lets you select the brightness of the receiver's

display. You might find this useful if you darken your room to watch

movies or listen to music.

1 If you want to use the remote control unit, press the

TUNER, VIDEO, AUX or GAME/F.AUX key on the remote

to set it to the receiver control mode.

2 Each time you press the DIMMER key, the display’s

brightness changes among the three available settings.

Select the brightness level you find most pleasing.

1 Bright

2 Medium

3 Dark

Sleep timer

The sleep timer function turns the receiver OFF (to the standby mode)

automatically when the set timer period has elapsed. The sleep timer

period can be set in 10-minute steps up to 90 minutes.

Press the SLEEP key repeatedly until the desired period before

turning the receiver OFF (standby mode) is displayed.

÷ Each press increments the sleep timer period by 10 minutes.

10 = 20 = 30 ..... 70 = 80 = 90 = Cancel = 10 = 20 = ...

÷ Pressing the SLEEP key after the sleep timer has started

allows you to check the remaining time period.

÷ To cancel the sleep timer, turn the receiver OFF (standby

mode) or press the SLEEP key repeatedly until the sleep

timer indicator disappears.

The sleep timer indicator lights up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood VRS6200 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood VRS6200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info