Bedienungsanleitung Kenwood xd 6000 xh (Seite 69 von 76) (Englisch)

157475

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

XD-8550/XD-6000 (En/T)

Preparation section Basic section Application section Knowledge sections

Be especially careful in the following conditions:

÷When the unit is brought from a cold place to a warm place, and there

is a large temperature difference.

÷When a heater starts operating.

÷When the unit is brought from an air-conditioned place to a place of

high temperature with high humidity.

÷When there is a large difference between the internal temperature of

the unit and the ambient temperature, or in conditions where conden-

sation occurs easily.

Cleaning the head section

There are precisely aligned parts around the heads, including the tape guides.

When cleaning, pay special attention so as not to apply shock to them.

Beware of condensation

When water vapor comes into contact with the surface of a cold

material, condensation is produced.

If condensation occurs, correct operation may not be possible, or

the unit may not function correctly.

This is not a malfunction, however, and the unit should be dried-out.

(To do this, turn the ON/STANDBY switch ON and leave the unit as it

is for several hours.)

Important Items

Note

Reference

Maintenance

Demagnetizing the head

When the recording / playback head is magnetized,

the sound quality will deteriorate. In such a case,

demagnetize the head using a commercially avail-

able demagnetizer (head eraser).

Cleaning the heads and peripheral compo-

nents

For maintaining the best condition of the deck and

for longer service life, always keep the heads (re-

cording / playback / erase), capstan and pinch roller

clean. To clean them, perform the following:

1. Open the cassette holder.

2. Using a cotton swab dipped in alcohol, clean the

head (recording / playback / erase), capstan and

pinch roller carefully.

Note related to transportation and movement

(CD player)

Before transporting or moving this unit, carry out the following

operations.

1. Turn the power ON. Then press the OPEN/CLOSE (0) key of

the CD player and take out all CDs.

DP-MH5: Ensure that no CD is loaded in any of the DISC1 to

DISC6 trays by opening each of them.

2. Select the “CD” input and ensure that the following message

is displayed.

3. Wait for a few seconds then turn power off.

Sound Retrieval System manufactured under licence from SRS Labs,

Inc. “SOUND RETRIEVAL SYSTEM” and the SRS Symbol are

trademarks of SRS Labs, Inc.

Purchase of this product does not convey the right to sell recordings

mode with the SOUND RETRIEVAL SYSTEM.

Maintenance of the set

When the front panel or case becomes dirty, wipe with a soft, dry

cloth. Do not use thinner, benzine, alcohol, etc. for these agents may

cause discoloration.

In regard to contact cleaner

Do not use contact cleaners because it could cause a malfunction.

Be specially careful not to use contact cleaners containing oil, for

they may deform the plastic component.

When your unit needs to be repaired, bring the entire set (Speakers

excluded) to your dealer.

Capstan

Pinch roller

Head

Tape guides

Cotton swab

Stored contents which are

cleared immediately when

power plug is unplugged from

power outlet

Clock display

Stored contents which are

cleared in at least a day after

power plug is unplugged from

power outlet

Amplifier

POWER status (ON or OFF)

Input selection

Volume control value

Tuner/equalizer unit

Receiving band

Frequency

Preset stations

Program timer setting contents

Balance setting

Equalizer’s manual memory cre-

ated by the user

SRS 3D level

Cassette deck unit

Recording level

Transport direction

DOLBY NR

Reverse mode

Memory backup function

PGM

MEMO

EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE

AUTO

TUNED

DISC ALL

STEREO

kHz

MHz

MUTE

PROG.

N.B.

O O DIs: C

MAX

SLEEP O.T.T. ECHO P.B.C.

EQ.

MANU.

CDMN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood xd 6000 xh Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info