61
SXRC Remote Control
Operation
led time MENU - The backlit keys on the SXRC have two
intensity modes, On and Dim. This menu lets you select how long
the SXRC waits when there is no button
press activity before switching from the On
level to the Dim level. The default is 90
seconds.
Use the
UP and DOWN arrow keys to
scroll through the available settings:
1 sec.(shortest delay) to 240 sec.
(longest delay)
Press the
ESC key to save the setting and
return to the DISPLAY menu.
NOTE:
This menu item works hand-in-hand with the LED ON LVL and
LED DIM LVL menu items. Use this menu setting to determine
how long your ISIS keys stay brightly lit after making your SXRC
adjustments.
At this point you have explored all the settings
in the DISPLAY menu. Press the
ESC key to
return to the SXRC SETUP menu.
autosearch MENU - You should be familiar with this menu
from the software updates we did earlier in
the manual. The AUTOSEARCH function
seeks out any amplifier connected to the
SXRC Communications Network, updates
the amplifier’s software if required and loads it in to the SXRC.
If for any reason you lose an amplifier from the SXRC due to
being un-plugged from the Communications Network, bad cable,
etc. OR if you are adding a new amplifier to the SXRC you use
this function.
Press the
ENT key to activate the
Autosearch function.
The SXRC will perform all of its steps (highly detailed on page
18...attempting to save a forest here...go back and check it out
there.) and return to the SXRC SETUP menu.
