Bedienungsanleitung Kinzo 31L809 (Seite 20 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

459472

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

31L809

ENGLISH

GENERATOR

31L809

WARNING

Read this manual carefully before using the machine, for your

own safety.

SAFETY INSTRUCTIONS

When using the machine, always observe the enclosed safety

instructions as well as the additional safety instructions.

The following symbols are used throughout this manual:

Denotes risk of personal injury or damage to the

tool.

You will find the following symbols on the machine:

Wear hearing protection.

Consult the manual.

Only use the machine outside, in well-ventilated

surroundings.

Do not use the machine in precipitation or in humid

surroundings.

Do not use the machine in surroundings where

sparks, flames or open fire can be present.

Do not smoke near the machine.

ADDITIONAL SAFETY INSTRUCTIONS FOR GENERATORS

■ Place the machine on a solid surface. Do not place the

machine on a metal surface.

■ Do not place the machine in the blazing sun. Do not expose

the machine to temperatures over 40 °C. Do not store the

machine in humid surroundings.

■ Before use check whether the power input of the equipment to

be connected is less than the maximum output of the generator.

■ Only connect the equipment when the generator is running at

full speed. Disconnect the equipment before switching off the

generator.

■ Do not connect any other energy sources to the machine.

Do not connect the machine to mains supply.

■ Immediately switch off the generator in one of the following

situations:

- hitches or unstable running of the motor

- decrease of the electrical output

- overheating of the connected load

- excessive vibrating of the generator

- sparking

- presence of smoke or fire

■ Make sure that the generator has enough fuel when connected

to the load.

■ Never add fuel when the machine is running. After use let the

machine cool down for at least 15 minutes before refuelling.

■ Avoid touching hot parts of the machine.

■ Do not store fuel near the machine.

■ The sound absorber and the air filter function as flame

catchers in case of after-burning. Therefore see to it that they

are mounted properly and are in good technical condition.

DESCRIPTION (fig. A)

This generator was designed to generate electricity to supply

mains-supplied machines or equipment.

1 On/off switch

2 Indicator lamp

3 Lid fuel tank

4 Alternating current output

5 Start cord

6 Dipstick

7 Reset button alternating current output

8 Earth connector

Adding fuel (fig. A)

Never add fuel when the machine is on. After use let

the machine cool down for at least 15 minutes

before refuelling. Always use fuel that fulfils the

following specifications: unleaded petrol,

octane content at least 85

Never smoke near the machine or the fuel. Never add

fuel in the vicinity of sparks, flames or open fire.

■ Remove the lid (3) from the filler opening.

■ Pour the fuel carefully in the filler opening. Never fill the tank

further than to the top of the fuel filter.

■ Place the lid back on the filler opening.

Starting the motor (fig. A & B)

■ Be sure that no load is connected.

■ Turn the fuel cock (9) to the position “ON”.

■ Slide the choke (10) all the way to the right.

■ Put the on/off switch (1) in the position “ON”.

■ Pull gently on the start cord (5) until you feel resistance.

■ Pull the start cord forcefully. Repeat this until the motor is

running.

■ Slide the choke (10) slowly all the way back to the left.

Instructions for use

■ Start the motor as described above.

■ To connect an electrical machine or equipment, put the mains

plug in the alternating current output.

Load protection device (fig. A)

in case of overload or short circuit, the overload protection

device interrupts the circuit.

■ Wait at least 1 minute before pressing the reset button (7).

Switching off (fig. A & B)

■ Be sure that no load is connected.

■ Put the on/off switch (1) in the position “OFF”.

■ Turn the fuel cock (9) to the position “OFF”.

Operating the gas handle (fig. B)

■ Turn the gas handle (10) to the left to slowly heat the motor.

■ Turn the gas handle to the right to slowly cool down the motor.

CLEANING AND MAINTENANCE

For good functioning and a long lifespan for the machine,

regular cleaning and maintenance is essential.

Do not perform any cleaning or maintaining activities

while the motor is running.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kinzo 31L809 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info