Bedienungsanleitung KitchenAid 740-0781 (Seite 22 von 31) (Englisch, Französisch, Spanisch)

581394

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Using Your Infrared Searing Burner

Infrared grilling produces intense heat which

quickly sears the meat.

Searing locks in flavor and juices while allowing the outer surface to

absorb smoke and food aroma that is produced as grease and drippings

are vaporized by the burner. The result is a crisp, flavorful outside with a

tender, juicy inside.

Preheat the infrared sear burner for 5 minutes.

Ensure th

at meats are fully thawed and that all excess fat is trimmed

away prior to grilling.

Leav

e the burner set to HI when placing food on the grill to sear.

Use the s

ear burner to sear meat 1 to 2 minutes on each side, then

move the meat to the main grill cooking surface to finish grilling to

the desired doneness.

NOTE: Grates are to be in place when using the infrared sear burner.

Lighting the Infrared Searing Burner

1. Do not lean over the grill.

2. Push in and turn the

control knob to IGNITE/ON. You will hear the

“snapping” sound of the spark.

3. When the infrared searing burner lights, continue to hold the knob in

for another 10 seconds, then release the knob and burner will stay lit.

You will hear the “snapping” sound of the spark until the knob is

released.

IMPORTANT: If the infrared searing burner does not light

immediately, turn the burner knob to OFF and wait 5 minutes before

relighting.

Manually Lighting the Infrar

ed Searing Burner

1. Do not lean over the grill.

2. Remove the manual lighting extension

(see following illustration)

and attach a match to the split ring.

3. Strike the match to light it.

4. Gently hold the lit

match close to the infrared searing burner.

5. Push in and turn the control knob to IGNITE/ON. Hold this knob in

for 10 seconds after the burner is lit. You will hear the “snapping”

sound of the spark until after the knob is released.

IMPORTANT: If the infrared searing burner does not light

immediately, turn the searing burner control knob to OFF and wait 5

minutes before relighting.

6. Remove the match and replace the manual lighting extension in its

holder.

Using Your Rotisserie Burner

A Rotisserie

kit can be purchased as an accessory for the grill. See

“Accessories” in the “Assistance” section.

To avoid damage to the warming rack, remove from grill when using the

rotisserie burner.

Do not use the main burners when the rotisserie burner is in use.

Lighting the Rotisserie Burner

1. Do not lean over the

grill.

2. Push in and turn the control knob to IGNITE/ON. You will hear the

“snapping” sound of the spark.

3. When the rotisserie burner lights, continue to hold the knob in for

another 10 seconds, then release the knob and burner will stay lit.

You will hear the “snapping” sound of the spark until the knob is

released.

IMPORTANT: If the rotisserie burner does not light immediately, turn

the burner knob to OFF and wait 5 minutes before relighting.

A. Lighting ex

tension

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

KitchenAid 740-0781 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info