7
What to do if… Possible causes Solutions
It is not cold
enough inside the
compartments
There could be various causes
Check that:
• the doors close properly.
• the appliance is not near a heat source.
• the air ducts inside the compartments
are not blocked, as this prevents the
circulation of cold air.
• the "Vacation mode" function is not
enabled (see Quick Start Guide)
If necessary, lower the temperature.
The area in contact
with the seal is hot.
This is normal in hot weather and when
the compressor is running.
No action is required.
If the doors do not
open and close
properly.
The door seals may be dirty or sticky. Clean the seals.
The appliance may not be level.
If necessary, level the appliance (see
Installation manual).
The internal light is
not working.
The "Standby" function may have been
enabled (depending on the model).
Disable the function (see the Quick Start
Guide).
The bulb may be burnt out.
Replace the bulb (see Instructions for Use,
section "Maintenance and Cleaning").
The control panel
will not do anything:
every time a button
is pressed, the
acoustic signal
sounds.
The "Child Safety", "Key Lock" or
"Ice/water dispenser lock" function may
have been enabled.
Disable the function (see the Quick Start
Guide).
The "Compartment
door open" symbols
blinks and an
acoustic signal
sounds (if present)
Open door alarm.
The alarm is activated when the doors are
left open for more than 2 minutes.
Close the doors or press the mute alarm
button to switch off the acoustic signal.
There are letters on
the display, and an
acoustic signal is
sounding (if
provided and not
previously disabled).
Malfunction Alarm
The alarm indicates that a technical
component has malfunctioned.
Call an authorized After-Sales Service.
Press the mute alarm button to switch off
the acoustic signal.
The "Eco mode" function may have been
enabled.
Disable the function (see the Quick Start
Guide).
