Bedienungsanleitung Kitvision Edge HD10 (Seite 11 von 18) (Englisch)

640448

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

20 21

[...continued] Using the camera

4. Photo shooting

You can set the image resolution before taking photos. Press the “M” key to enter the setup interface, press the

“>” or “<” keys to move the cursor to

, select the menu “Image Resolution” and press the “OK” key to enter the

resolution setup menu. There are three resolution modes available for your selection:

3M: Photo shooting resolution of 2048 x 1536

5M: Photo shooting resolution of 2592 x 1944

8M: Photo shooting resolution of 3200 x 2400

• Single shot: In preview mode, press the “Shutter” once to shoot a photo. You will hear a “Click”, the front

green indicator will ﬂash once (the photo shooting icon on the LCD segment screen will also

ﬂash once) and the system will return to the preview state

• Triple Shot: Press the “M” key to enter the camera setup interface. Press the “>”or “<” keys to move the

cursor to

, press the “>” or “<” keys to select the menu “Tripple” and press the “OK” key to

conﬁrm. Press the “M” key to exit the setup interface after setting. When the “Shutter” is

pressed once, the camera will then take three consecutive photos

• Time-lapse mode: Press the “M” key to enter the camera setup interface, press the

, key to move the cursor to

, then press the “>” or “<” keys to select the menu “Continuous Shooting” and press the “OK”

key to set the continuous shooting interval time at 2s, 3s, 5s, 10s, 20s or 30s. Press the “M”

key to exit the setup interface after setting the interval time. When the “Shutter” button is

pressed, the camera will start shooting one photo every 2s, 3s, 5s, 10s, 20s, or 30s until the

button is pressed again to stop

• Self-timer mode: Press the “M” key to enter the camera setup interface, press the “>” or “<” keys to move the

cursor to

, then press the “>” or “<” keys to select the menu “Self shot” and press the “OK”

key to set the delay time at 0s, 5s or 10s. Press the “M” key to exit the setup interface after

setting the delay time. When the “Shutter” is pressed once, the camera will then start the

timer and shoot a photo at the end of the delay time

Note: If the memory space becomes full, the system will display the message “Out of Memory” on the TFT display

screen and return to the preview mode

5. Voice recording

Press the “M” key to enter the camera setup interface, select the menu “Capture Mode”, press the “OK” key to

enter the selection interface, press the “>” or “<” keys to select

, press the “OK” key to conﬁrm your selection,

and ﬁnally press the “M” key to exit the setup interface. Press the “Record” key to start recording and the green

indicator will ﬂash slowly, the TFT screen will display the voice recording icon and the timer will start.

After sound recording, press the “M” button to return to the system setting interface. Select the “Capture Mode”

menu and press “OK” to enter the selection interface. Press the “>” or “<” keys to select

, exit the voice mode

then press the “M” key to return to the preview interface.

Note: When the camera is restarted or it wakes up, it will recover to video recording mode

[continued...]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kitvision Edge HD10 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kitvision Edge HD10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info