Bedienungsanleitung Klarstein IC-F62D NXDN (Seite 19 von 125) (Englisch)

670352

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

PANEL DESCRIPTION

2-12

Category: Signaling/Call (Continued)

Status

1� Push to display the “Status List” screen�

2� Push [Up] or [Down] to select a Status message�

3� Push [PTT] to send the message to the currently

selected station or group, or push [OK] to set�

L See pages 7-5, 8-6, and 9-4 for details�

Message

1� While in the Standby mode, push to display the

“Message List” screen�

2� Push [Up] or [Down] to select a message�

3� Push [PTT] to send the message to the currently

selected station or group�

L See pages 7-6, 8-7, and 9-5 for details�

Write Message

1� Push to display the “Write Message” screen�

2� Write a message�

3� Push [PTT] to send the message to the currently

selected station or group�

L See pages 7-7 and 9-6 for details�

Category: Trunking

Site Select

In the Digital mode

1� Push to display the “Site Select” screen�

2� Push [Up] or [Down] to select a Site number�

3� Push [OK] to set the selected Site�

• The selected site is locked�

Site Lock

In the Digital mode

Push to turn the Site Lock function ON or OFF�

L When this function is turned ON, the transceiver cancels

resuming a roaming scan, and stays on the current site,

regardless of the error rate�

Roaming Request

In the Digital mode

Push to turn the Roaming Request function ON or

OFF�

L When this function is turned ON, the transceiver starts or

resumes a roaming scan, regardless of the error rate�

L When the Site Lock function is turned ON, pushing this

key resumes a roaming scan�

Category: Functions

Light

Push to turn ON the backlight for about 5 seconds,

even if the backlight setting is OFF�

Lock

Hold down for 1 second to turn the Key Lock function

ON or OFF�

L All assignable keys except the following are electronically

locked: [Monitor], [Light], [Lock], [Call], [Emergency], and

[Surveillance]� Also, [PTT] and [Power] are usable�

Sp. Func 1, Sp. Func 2, Sp. Func 3,

Sp. Func 4, Sp. Func 5, Sp. Func 6

Sp� Func 1 through Sp� Func 6 are reserved for PC

commands�

VOX

Push to turn the VOX function ON or OFF�

L The function automatically switches between receive and

transmit by detecting your voice�

NOTE:

• To use the function, a headset*

and a VOX

converter cable are required (user supplied)�

• When the VOX function is ON and using a third

party Bluetooth headset, Synchronous Connection-

Oriented (SCO) link*

is always connected�

Bluetooth headset is also usable�

When the VOX function is ON and using a third party

Bluetooth headset, Synchronous Connection-Oriented

(SCO) link is always connected�

Lone Worker

Push to turn the Lone Worker function ON or OFF�

L If no operation occurs during the specied period,

the Lone Worker function automatically makes the

transceiver enter the Emergency mode�

NOTE: To use the Lone Worker function, set the

related settings using the programming software�

Surveillance

Push to turn the Surveillance function ON or OFF�

When this function is turned ON, the beep is not heard

and the backlight and the Status indicator do not light,

even when a signal is received, or a key is pushed�

Assignable Software key functions (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarstein IC-F62D NXDN Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info