Bedienungsanleitung Klipsch LF-10 (Seite 7 von 12) (Englisch)

584802

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

We Want Your Klipsch Product to Look and

Sound as Good as When it Left the Factory.

Please Check Promptly for Transit Damage.

Each Klipsch product is individually tested for sonic quality and inspected for superior appearance

before it leaves the Hope, Arkansas factory. Your loudspeaker left the factory in perfect condition in

packaging carefully engineered to protect both the working parts and ﬁnish. However, in certain

extreme circumstances, the products may be damaged in transit.

To ensure that your loudspeaker is in its original condition, please inspect it immediately. If any damage

is discovered, notify the authorized Klipsch dealer that the unit was purchased from or the transporta-

tion company responsible for safe delivery. In the latter case, make a request for inspection from the

transportation company and hold the product in its original shipping carton for the inspector. After a

joint inspection report is made, ﬁle a claim with the transportation company.

Subwoofer Placement

Your Klipsch subwoofer is designed to operate at frequencies below 120Hz which are essentially omni-

directional (difﬁcult to localize). There may be several options for the placement of the subwoofer in

your room which will affect its frequency response and output level. Corner placement improves the

acoustic loading of the subwoofer, increasing its output and dynamic range capabilities. The least amount

of output will result when the subwoofer is placed away from walls or in the center of the room.

Asymmetrical placement of two subwoofers in a room may improve low frequency reproduction by pro-

viding a smoother and more consistent response pattern. Since even minor repositioning can result in an

audible performance change, experiment with different locations for best results.

In most cases, we recommend that the subwoofer be placed in the vicinity of the speakers with which it

is being paired. A subwoofer reproducing front channel bass will generally perform better when placed in

the same end of the room as the main speakers. A subwoofer connected to the rear channels of a sur-

round system typically performs best when positioned in the rear of the room.

If your subwoofer is to be placed in an enclosed cabinet, provisions should be made to ventilate the heat

radiated by the enclosed ampliﬁer. Additionally, since a portion of the acoustic output is generated by the

side-ﬁring drivers, a minimum of several inches of space should be provided around the subwoofer. The

front of the cabinet should be acoustically transparent.

How to Connect Your LF Series Subwoofer

AC Power

Since your subwoofer has an internal power ampliﬁer, it must be plugged into a nearby AC wall outlet.

The subwoofer should be unplugged from the AC power with the power switch in the OFF position dur-

ing hookup and installation. To eliminate a tripping hazard, all connections should be unplugged from

the back panel of the subwoofer if it is being moved. Avoid extremely long extension cords of small

gauge since they can impair the performance of the subwoofer’s ampliﬁer and present a potential ﬁre

hazard. If the subwoofer will not be used for an extended period of time, unplug the power cord from

the AC power outlet.

Note: 230 volt models are not supplied with an AC power cord but are equipped with an IEC-type

power cord socket.

CAUTION: SINCE YOUR KLIPSCH SUBWOOFER HAS BUILT-IN ELECTRONICS, DO NOT PLACE

IT NEAR SOURCES OF HEAT OR MOISTURE. TAKE CARE TO ROUTE THE POWER CORD SO

THAT IT WILL NOT BE CUT, DAMAGED OR PINCHED.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klipsch LF-10 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info