Bedienungsanleitung Klipsch RoomGroove (Seite 3 von 20) (Englisch, Französisch, Spanisch)

588332

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Congratulations on your purchase of the Klipsch RoomGroove music

center. The RoomGroove is a wireless transceiver utilizing Wireless

KlipschCast

Technology to transmit and receive CD-quality audio

signals to and from other KlipschCast components. The RoomGroove

features an iPod

dock and auxiliary input for connecting your

favorite components and enjoying them locally or transmitting them

throughout your home.

The RoomGroove is a true two-way, stereo sound system incorporating

two long-throw woofers and two MicroTractrix

Horn-loaded tweeters

in a ported enclosure. This system provides the accuracy, detail and

output that will bring your music to life as only Klipsch can.

Unpack the Box

Unpack the entire contents of the shipping box and make sure you

have the following items.

The RoomGroove is intelligently designed to easily accommodate

all iPods. Touching the Klipsch logo on the front of the RoomGroove

will reveal the retractable iPod dock. The RoomGroove must be

powered on for the drawer to open and close. When the dock is

extended, touching the dock again will cause it to retract. The dock

will not move when an iPod is docked. The dock will automatically

retract when no iPod is present and the RoomGroove is in standby

mode (the power LED will be red).

Docking and Listening to an iPod

The RoomGroove offers a 3.5mm stereo auxiliary input on the

rear of the device. To connect an auxiliary device, simply plug the

audio output of the device into the “Aux Input” on the rear of the

RoomGroove. You must use a 3.5mm stereo cable.

Connecting an Auxiliary Source

Place the RoomGroove on a sturdy surface. Plug the power cord into

the rear of the RoomGroove and then into a standard wall outlet. The

RoomGroove is now ready to listen to any source being transmitted

with wireless KlipschCast Technology.

The RoomGroove is designed to work with Apple universal well

inserts. Several inserts are supplied with your RoomGroove

system. If your iPod came with an insert, it can also be used in the

RoomGroove. To conﬁgure the RoomGroove for your speciﬁc iPod,

select the appropriate well insert and place it in the universal well

as shown in the diagram. Now you are ready to dock your iPod.

While your iPod is docked, its battery is charging (until it is fully

charged).

To listen to the docked iPod, press the “Listen” button on the

RoomGroove or the remote until the “Listen” light becomes blue

and you hear the iPod. The iPod can be directly accessed by

pressing the “iPod” button on the RoomGroove’s remote control.

Thank You

Remote Control

RoomGroove

Universal Well Inserts

Power Supply

To listen to the auxiliary source, press the “Listen” button on

the RoomGroove or the remote until the “Listen” light becomes

blue and you hear the auxiliary device. This can also be done by

pressing the “Aux” button on the RoomGroove’s remote control.

Note: The “Listen” light will be blue when listening to either a

local iPod or a device connected to the local auxiliary input. If

both inputs are in use, the “Listen” button will go from the Aux

to the iPod in that order.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klipsch RoomGroove Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info