Bedienungsanleitung Knex 78610 - Education Intro to Levers and Pulleys Teachers Guide (Seite 38 von 62) (Englisch)

679357

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Teacher’s Notes

See A Quick Guide to Levers for

additional information.

You may find it useful to draw a

diagram on the board to illustrate

this arrangement.

 •Askeachgrouphowtheymighttestthescissors’

cutting action? Fingers are NOT allowed, even

with plastic.

 •Whereisthestrongestcuttingactionfound?

 •Whereistheweakestcuttingactionfound?

 •Askthechildrentodescribeandexplainverballyand

in written text, how their K’NEX scissors work. They

should be encouraged to use labelled drawings

indicating the positions of the fulcrum, effort and

load and the direction of the applied forces.

Whole Class

 •Showthechildrenaselectionofotherscissor-like

cutting tools with which they may be familiar and which

have a similar cutting action to scissors.

 •Discusshowallthecuttingtoolshavethesamebasic

design but that the design has been modified to make

each of them meet different needs.

  •Foreachcuttingtoolinturnask:

  •Whattypesofmaterialisthistooldesignedtocut?

  •Wouldscissorsbeabletocutthesematerials?

If not, why not?

  •Howdoesthedesignofthiscuttingtoolallowitto

cut materials that scissors cannot?

  •Askthechildrentomakelabelleddrawingsofthe

different types of cutting tools, indicating the position

of the fulcrum, effort and load. They should make

short notes to describe how the design of the cutting

tool fits them for the jobs for which they are used.

You might suggest using thin

rolls of modelling clay/Plasticine

and use the indentation made by

the cutting blades as a possible

measure of the cutting forces

made by the blades.

To promote the wider use and

application of ICT skills and

practices, the children’s models

and work might be recorded using

a digital camera.

Cutting tools with short blades

and long handles are used to cut

difficult materials such as wire or

thick branches. The long handles

help amplify the squeezing force

(effort), while the short blades mean

that the load, or resistance, is near

the fulcrum or hinge. This posi-

tion is where the cutting forces are

greatest. Remind the children about

their investigations when using their

K’NEX scissors to cut modelling

clay.

Hair cutting scissors, on the other

hand, have long blades and short

handles because the main need is

to make long straight cuts. You do

not need a lot of cutting force to

cut through hair.

levers and pulleys

website: www.knexeducation.co.uk

Lesson 6: The Scissors

Education

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Knex 78610 - Education Intro to Levers and Pulleys Teachers Guide Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Knex 78610 - Education Intro to Levers and Pulleys Teachers Guide

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info