Bedienungsanleitung Koenic KAC 3232 CH (Seite 48 von 207) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

782555

Zoom out

Zoom in

Vorherige Seite

1/207

Nächste Seite

English

Preprogramming a function

By pushing the SHORTCUT button any

function and temperature can be saved and

recalled.

• Choose your desired function e.g. using

the MODE, TEMP / + or / – and FAN

buttons, etc.

• Press and hold SHORTCUT button until the

display ﬂashes one time to save the setting.

• The preset setting can be recalled anytime

and from any mode by simply pushing the

SHORTCUT button.

Fig. 10 Water drainage

Water is only collected during automatic AUTO,

cooling COOL and dehumidifying mode DRY.

During dehumidifying mode DRY water

is drained immediately through the upper

drain outlet and the drainage hose must be

continuously connected.

The water must be drained through the hose

into a suitable container or nearby drain using

the upper drain outlet.

Note:

KAC3232/ KAC 3352 is equipped with a self-

evaporating system. The condensing water

is self-evaporated and released through the

air exhaust.

Warning

Danger of ﬂooding! Do not leave the

product unattended when draining to an

external container! Empty the container

frequently to avoid spilling over and water

damage.

Fig. 9 Setting the timer

The timer switches the product on or standby

when a user-deﬁned time has elapsed. When

switching on, the last mode and setting will be

used.

The set durations will be counted down

immediately.

• Press the timer program button TIMER at

the product or the speciﬁc TIME ON/OFF

button at the remote control to enter the

timer setting for either the auto-on or auto-

o timer. The respective indicator for each

setting will light up.

• Press the + / – buttons or the speciﬁc TIME

ON/OFF button at the remote control as

often as necessary to set a time from 0.5 to

24 hours.

• The setting will be saved in the product

after 5 seconds without input.

Note:

The indicator lights are on when the timer is

activated.

Examples:

• To have the product switch into standby

after 1 hour and on again after another 1½

hours, set the auto-o time to 1.0 h and the

auto-on time to 2.5 h during operation.

• To have the product switched on after 8

hours and standby after another 8 hours,

set the auto-on time to 8.0 h and the auto-

o time to 16.0 h while in standby.

Note:

• The adjusting increments are 0.5 hours up

to 10 hours, then 1 hour up to 24 hours.

• The respective indicator will be lit, when a

time is set.

• Switching the product on or into standby

manually will cancel the timer setting.

• The timer settings will be lost once the

respective actions were conducted and

the time needs to be set again. The timer

setting will be lost in case an error occurs

(see protection and error codes).

IM_KAC3232_KAC3352_181220_V04_HR.indb 48 20/12/18 4:15 pm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KAC 3232 CH Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info