19
GETTING STARTED
IMPORTANT NOTE: Fully charge the pool vacuum before using it for the first time.
Charging the battery
WARNING!
- Charging must be done indoors, in a well-ventilated area away from sunlight, children, heat,
ignition sources, and with an ambient temperature between 5˚C (41˚F) and 35˚C (95˚F).
- Never use the external adaptor and charging base if any damage is detected.
- Use only the original external adaptor provided.
- Make sure the pool vacuum and the charging base are clean and dry before set-up.
1. Place the unit on a flat surface. Align and slide the hook of the charging base onto the
side notch at the bottom of the main body until it stops. Make sure their contact plates
are properly in contact.
2. Plug the female jack of the external adaptor into the charging port at the end of the
charging base.
WARNING!
- DO NOT handle the pool vacuum, external adaptor and charging base while it is charging
with wet hands and without shoes.
- Connect the external adaptor to the power source through a residential current device
(RCD). Charge the pool vacuum with the original external adaptor provided.
- DO NOT use power extension cords.
- Fully charge the battery before first use.
- Charging must be done indoors, in a dry & well-ventilated area away from sunlight, children,
heat, ignition sources, and with an ambient temperature between 5˚C (41˚F) and 35˚C
(95˚F).
