Bedienungsanleitung Kona 2017 (Seite 13 von 42) (Englisch)

780524

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

KONA OWNER’S MANUAL

service or maintenance. Ask your dealer for recommended

service intervals for your suspension seat post.

Small changes in saddle position can have a substantial

effect on performance and comfort. To nd your best

saddle position, make only one adjustment at a time.

WARNING:

After any saddle adjustment, be sure that

the saddle adjusting mechanism is properly tightened

before riding. A loose saddle clamp or seat post clamp

can cause damage to the seat post, or can cause you

to lose control and fall. A correctly tightened saddle

adjusting mechanism will allow no saddle movement in

any direction. Periodically check to make sure that the

saddle adjusting mechanism is properly tightened.

If, in spite of carefully adjusting the saddle height, tilt and

fore-and-aft position, your saddle is still uncomfortable, you

may need a different saddle design. Saddles, like people,

come in many different shapes, sizes and resilience. Your

dealer can help you select a saddle which, when correctly

adjusted for your body and riding style, will be comfortable.

WARNING: Some people have claimed that

extended riding with a saddle which is incorrectly

adjusted or which does not support your pelvic area

correctly can cause short-term or long-term injury to

nerves and blood vessels, or even impotence. If your

saddle causes you pain, numbness or other discomfort,

listen to your body and stop riding until you see your

dealer about saddle adjustment or a different saddle.

C) HANDLEBAR HEIGHT AND ANGLE

Your bike is equipped either with a “threadless” stem (g.

6), which clamps on to the outside of the steerer tube, or

with a “quill” stem (g. 7), which clamps inside the steerer

tube by way of an expanding binder bolt.

If you aren’t absolutely sure

which type of stem your bike

has, ask your dealer. If your

bike has a “threadless” stem,

your dealer may be able to

change handlebar height

by moving height adjust-

ment spacers from below the

stem to above the stem, or

vice versa. Otherwise, you’ll

have to get a stem of differ-

ent length or rise. Consult

your dealer. Do not attempt to

do this yourself, as it requires

special knowledge. If your bike

has a “quill” stem, you can ask

your dealer to adjust the han-

dlebar height a bit by adjusting

stem height. A quill stem has

an etched or stamped mark on

its shaft which designates the

stem’s “Minimum Insertion”

or “Maximum extension.” This

mark must not be visible above

the headset

WARNING: A quill stem's Minimum Insertion Mark

must not be visible above the top of the headset. If the

stem is extended beyond the Minimum Insertion Mark

the stem may break or damage the fork's steerer tube,

which could cause you to lose control and fall.

WARNING: On some bicycles, changing the stem

or stem height can affect the tension of the front brake

cable, locking the front brake or creating excess cable

slack which can make the front brake inoperable. 13

2K17_Kona_Owners_Manual.indd 13 29.1.2016 15.27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kona 2017 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info