A-14 Recording
E
A-15Recording
RECORDING
RESET (RECORDING MODE RESET)
While pressing the dial release, turn the
exposure-mode dial to the appropriate
memory register, 1, 2, or 3.
Recall memory
MEMORY
Settings stored:
The memory function allows you to store the current camera
setting and recall them.
• Exposure mode
(P, A, S, M)
• Shutter speed in
S/M
• Aperture in A/M
• Focus mode (A, C,
S, Manual)
• Focus area (Wide,
Local)
• Bracket setup
• Exposure com-
pensation value
• Flash compen-
sation value
• Drive mode
• Flash mode
• AF/Release pri-
ority
• Digital FX
• Metering mode
• Flash-metering
mode
• Auto AF setup
• Color mode
• ISO setting
• Image size
• Image quality
• White balance
: select : save
Select register
MENU > 1 > Reset > Enter > •:enter > MENU
Recording settings are reset as follows.
(Continued on the next page.)
3. Use the left/right keys to select the mem-
ory register, 1, 2, or 3.
4. Press the central button to save the set-
tings.
• All setting in the selected register are
replaced with the new settings.
Color temperature setting (p. 62)
1. Turn the white-balance dial to the color
temperature position, and press the
white-balance button.
2. Use the control dials to set the color tem-
perature.
• The front dial adjust the temperature in
thousands and the rear in hundreds.
3. Press the central button to complete the
operation.
:adjust :enter
Color temperature
• The settings are displayed on the monitor.
1. Confirm the settings to be saved on the
camera.
2. Press the memory set button.
• Memory screen shows the settings to be
saved.
Store memory
Custom white balance: Register 1
Digital FX: 0
Flash control: ADI
Manual flash: 1/1
setup: 0.3Ev/3 frames
Focus area selection: Spot AF area
Preset-white balance: Daylight: 0
Color temperature: 5500K
Flash mode: Fill flash or Red-eye reduction*
setup: 0.3Ev/3 frames
Exp. compensation by control dial: 0.0
* Whichever of the two flash modes was last set.
(p. 63)
(p. 70)
