730851
8
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
ENGLISH
8
7.
Please enter a Camera name (2 to 20 characters) and default
password “0000” or "00000000". You are encouraged to
change the default password after setup for security
purposes. Then click “OK” in
the top right corner.
8. The camera will restart and the Smartphone App will
automatically connect to the camera in Live View.
9. When uCare Cam successfully connects to your Router,
the status LED color will turn Orange. It may take up to 10
minutes. If the status LED color does not turn Orange, please
check your Router and make sure uCare Cam is within the
signal area of your WiFi Router. Then try the setup again.
10. If the setup is successful, the uCare Cam will be automatically added to your Camera List
window and you can click on the camera name to view Live Video.
F. iOS – Add uCare Cam (already connected to Router) to APP
There are three ways to add a uCare Cam to the Camera List view if the uCare Cam is already
connected to the internet. You can:
Scan for uCare Cam in local intranet
Scan QR code at back of uCare Cam
Type in 20 digit code
Method 1: Scan for uCare Cam in local intranet
1. Make sure your Smartphone is connected to the same Router
as your uCare Cam. Open up the Smartphone APP “uCare
Cam”
and click on the “+” at the top right of the screen.
2. Click on “Scan Camera’s UID in intranet”.
3. You will see a list of UID’s that were found on your local
intranet.
4. Click on the UID you would like to add.
5. Please enter a Camera name (2 to 20 characters) and the
camera password. Default password is 0000 or 00000000.
Click “Done” on
top right of window.
6. You will see the Camera name now in Camera List view. It
should indicate that the Camera is “Online”. To connect to
the Camera, please click on Camera name. If the Camera is
not “Online”, you may need to force Reconnect. To force
Reconnect, click on the right arrow and click on “Reconnect”.
Click on Camera name once it shows “Online”.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig SAS-IPCAM115 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Konig SAS-IPCAM115

Konig SAS-IPCAM115 Kurzanleitung - Alle Sprachen - 281 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info