Bedienungsanleitung Korg AX100G (Seite 10 von 18) (Englisch)

488491

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

3. Editing

Editing other effects

Press the select switch for the desired effect to be edited.

MOD: Edits the Modulation effect (e.g., chorus)

PEDAL: Edits the Pedal effect (e.g., wah)

AMB: Edits the Ambience effect (e.g., delay)

CABI: Edits the Cabinet effect which models the cabinet

resonances of a guitar amp

NR LEV: Edits the noise reduction and program level (volume)

For some effects, the Modulation and Pedal effects, or the Pedal

and

Ambience effects cannot be used simultaneously. In the case

of such a combination of effects, attempting to turn on both si-

multaneously will automatically turn off the previously-on ef-

fect.

As an example, here's how to select CHORUS as the Modula-

tion effect.

1. Press the MOD switch. The LED beside it will blink, indicat-

ing that the Modulation effect is selected.

Even if the Modulation effect has been turned off within the

program, it will be turned on at this point.

2. Rotate value knob 1 (TYPE) to select CHORUS. The type name

will appear in the multi-display. If you select the effect that

had originally been selected, the Original icon will appear in

the multi-display.

3. Value knobs 2, 3, 4 and 5 will adjust the chorus speed (SPEED),

chorus depth (DEPTH), chorus feedback amount (FEED-

BACK), and the mix balance between the chorus sound and

the direct sound (MIX). If the adjusted value matches the un-

edited value (the original parameter value) as you rotate a

knob, the Original icon will appear in the multi-display.

The value knobs that can be used and the parameters that are

assigned will depend on the type of each effect. (See p.12 "Effect

parameters.")

Original icon

Parameter

Select

Modulation

effect type

MOD switch

MIX

FEEDBACK

DEPTH

SPEED

Using the TAP switch to edit the delay time

When using the Ambience or Pedal DELAY effect, press the TAP

switch two times at the tempo of the song you are playing. The

AX100G will detect the interval, and set the delay time auto-

matically.

You can set the delay time in the same way even while you are

not playing.

Modifying the program name

Press the NR LEV switch so that the LED beside the switch is

blink. Use value knob 2 to select the character that you wish to

change (the character will blink), and use value knob 1 to change

the character. The available characters are shown below.

Available characters

If you wish to save the modified program name, you must per-

form the “Writing programs” operation. If you turn off the power

or select a different program without writing the program, the

program name you edited will revert to its previous setting.

Writing programs

Here’s how to write an edited program.

1. Press the WRITE switch, and the Multi-display will indicate

“✳WRITE✳.” The number LED will blink.

2. Use the UP and DOWN switches to select the destination for

your program.

3. Press the WRITE switch once again, and the display will read

“COMPLT” to indicate that the program has been written. You

will then return to Program mode.

If you decide not to write, press the EXIT switch to cancel the

Write operation.

If you write an edited program to a different program number,

the program that was overwritten will be lost.

It is not possible to write to a preset program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg AX100G Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info