Bedienungsanleitung Korg ESX-1 (Seite 10 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Common section

10. RESET, ERASE key

Pressing this key will immediately reset the cur-

rent pattern or song back to the beginning. Dur-

ing playback, you can hold down the shift key and

press this key to erase data from the current part.

11. REC key

Use this key to record rhythms, phrases, or knob

movements. During playback or recording, you

can use this key to toggle recording on and off.

In Sample or Pattern mode, you can hold down

the SHIFT key and press this key to enter sam-

pling-ready mode; then press the PLAY key to start

sampling.

12. STOP/CANCEL key

Use this key to stop playback of a song or pattern,

or to cancel execution of an operation.

13. PLAY/PAUSE key

Use this key to begin, pause or resume the play-

back of a pattern or song.

14. TAP key

You can set the tempo by pressing this key at quar-

ter-note intervals of the desired tempo.

15. PART MUTE, REST/TIE key

During playback, hold down this key and press a

part key to mute that part. When you mute a part,

this key will turn on (lit), and the muted part key

will go dark. During step recording, use this key

to input a rest or tie.

16. SOLO, TRANSPOSE key

During playback, hold down this key and press a

part key to “solo” that part (i.e., you will hear only

that part). When you solo a part, this key will turn

on (lit). If you want to solo more than one part,

hold down the solo key and select each part that

you want to solo. Press this key once again to turn

it off (dark) and defeat the solo function. Also, you

can hold down this key and turn the dial or use

the step keys to transpose a phrase. (☞p.41 “Trans-

pose”)

1. AUDIO IN THRU key

Selecting this key will send the sound from the au-

dio in jack directly to the line output jacks and

headphone jacks unchanged.

When this key is on, the effect, part common,

modulation, and filter parameters of the Audio In

part are disabled.

2. TEMPO LOCK key

If this key is on, the tempo will stay at its current

value, even when you switch patterns.

3. AUTO BPM SCAN key

If this key is on, the tempo will be detected from

the music connected to the audio in jack.

4. WRITE/RENAME key

This key allows you to save the changes you make

in each mode, and to save any pattern set data you

edit.

By holding down the SHIFT key and pressing this

key, you can rename a pattern or song.

5. BEAT LED

This LED blinks at quarter-note intervals of the

current tempo.

6. Dial

Use this dial to edit the value shown in the dis-

play.

7. / (cursor keys)

Use these keys to select a parameter from the ma-

trix menu. The currently selected parameter will

be shown in the display.

8. Matrix menu

The matrix menu lists the parameters that are

available in each mode. Use the cursor keys to se-

lect a parameter.

9. Mode keys

Use these keys to select either the PATTERN mode,

PART EDIT mode, STEP EDIT mode, SONG mode,

SAMPLE mode, GLOBAL mode.

10 11 12 13 14 15 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info