Bedienungsanleitung Korg ESX-1 (Seite 11 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

2. Parts and their functions

Edit section

1. EFFECT

In this section you can select the type of effect and

adjust various parameters.

: supports motion se-

quence.

TYPE (effect type): Selects the type of effect.

FX EDIT1 (effect edit 1) : Adjusts the effect. The

actual parameter being controlled will

depend on the effect type.

FX EDIT2 (effect edit 2) : Adjusts the effect. The

actual parameter being controlled will

depend on the effect type.

FX CHAIN (effect chain): On the ESX-1, the output

of one effects processor can be fed to the

input of another. The connection will

change each time you press this, and the

connection that is lit will be used.

EDIT SELECT: Chooses which effects processor is

currently being edited.

MOTION SEQ. (motion sequence): Records and

plays back movements of the FX EDIT1

and FX EDIT2 knobs. This will alternate

between on (lit) and off (dark) each time

it is pressed.

2. PART COMMON

These are the parameters that are common to the

drum parts and to the keyboard parts.

: supports

motion sequence.

MOTION SEQ. (motion sequence): Turning this

function on will allow you to record and

playback knob movements for each part.

This key will change successively be-

tween on (SMOOTH lit), on (TRIG

HOLD lit), and off (dark) each time it is

pressed.

PITCH/GLIDE : For a drum part, this knob sets

the pitch. For a keyboard part, it speci-

fies the time it takes for the pitch to

change smoothly between two legato

notes.

EG TIME : Adjusts the envelope time (the time it

takes for the note to decay) for each part.

PAN (panpot) : This controls the position of the

part in the stereo field for the line out-

puts (L/MONO, R) or headphones. If a

part is set to the individual (3/4) output

bus (☞p.26: Output bus) this control will

adjust the panning to the individual out-

puts (INDIV. OUT 3, 4).

LEVEL : Adjusts the volume of each part. For an

accent part, this will adjust the strength

of the accent.

START POINT : Sets the playback start point for

the sample assigned to each part.

AMP EG : Selects the amp envelope shape for each

part. The envelope will alternate be-

tween (decay) or (non-decay) each

time you press this.

ROLL : For each part, this will switch the roll ef-

fect on (lit) or off (dark).

FX SELECT (effect select) : Selects which effect

processor will be applied to each part.

If FX SEND is on, the selected effect will

be applied. This setting is ignored for

parts whose output bus (☞p.42: Output

bus) setting is 3/4.

FX SEND (effect send) : Selects whether the sound

of the current part will be sent to the se-

lected effect. This will alternate between

on (lit) and off (dark) each time it is

pressed. This setting is ignored for parts

whose output bus (☞p.42: Output bus)

setting is 3/4.

REVERSE : Selects whether reverse playback will

be used for each part. This will alternate

between on (lit) and off (dark) each time

it is pressed.

3. MODULATION

These are the parameters such as LFO and EG that

create time-varying changes in the sound.

: sup-

ports motion sequence.

SPEED : Adjusts the modulation speed.

DEPTH : Adjusts the modulation depth.

TYPE (modulation type) : Selects the type of

modulation.

DEST (destination) : Selects which parameter will

be affected by the modulation.

BPM SYNC : Turning this on (lit) will cause the

modulation to be in sync with the cur-

rent tempo.

4. FILTER

These parameters modify the tonal character of the

part.

: supports motion sequence.

CUTOFF : Adjusts the cutoff frequency of the fil-

ter.

EG INT (EG intensity) : Adjusts the depth of the

filter envelope.

RESONANCE : Adjusts the resonance of the fil-

ter.

TYPE (filter type) : Selects the type of filter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info