Bedienungsanleitung Korg ESX-1 (Seite 49 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

5. Pattern mode

REVERSE .....................................................................On, Off

Switches reverse playback for the sample on (lit) or off (dark).

Modulation

These parameters apply time-variant change to the sound, using an

LFO or EG.

SPEED........................................................................0...127

Adjusts the speed of modulation. If BPM SYNC is on, the speed will

synchronize to the tempo. The range is 8/1~1/64.

DEPTH ...................................................................... -63...+63

Adjusts the depth of modulation.

TYPE................................................... , , , ,

Selects the type of modulation.

Settings other than EG will apply cyclic modulation. If you select

EG, the effect will be at maximum when the note begins, and will

then gradually decrease.

If the modulation type is “ ,” the modulation phase will be not

reset when the note is triggered. For other types, the phase will be

reset by each trigger.

DEST .............................................. PITCH, CUTOFF, AMP, PAN

Selects the parameter to which modulation will be applied.

You cannot select “PITCH” for the audio-in part.

BPM SYNC ..................................................................On, Off

Turn this on if you want the modulation cycle to synchronize to the

tempo. This will light when synchronized.

The sounds of drum parts 6A and 6B can be edited independently,

but cannot be played simultaneously.

If the sound does not change when you turn the knobs or switch the

keys, either those knobs or keys are not valid for this part, or a Mo-

tion Sequence (☞p.68 “Motion Sequence”) is running.

Filter

Here you can modify the tone of the waveform generated by the

oscillator by distorting or filtering it.

CUTOFF ...................................................................... 0...127

Adjusts the cutoff frequency of the filter. The result will depend on

the type of filter selected.

With some settings, the sound may be distorted, or there may be

almost no sound.

EG INT ..................................................................... -63...+63

Specifies the depth and direction in which the EG (envelope genera-

tor) will change the cutoff frequency. The EG will start the moment

the trigger turns on (i.e., the moment you press the step key). If the

knob is in the center position, the EG will not affect the sound.

If the gate time length of a step extends beyond the beginning of the

next step, the EG will not be retriggered when the next step is

sounded.

RESONANCE .............................................................. 0...127

Emphasizes the region around the cutoff frequency, adding a dis-

tinctive character to the sound. With the resonance raised, you can

move the cutoff knob or adjust EG INT or EG TIME to produce the

"meow" sound typical of analog synthesizers.

Depending on the cutoff frequency or the pitch you play, high set-

tings of resonance may distort the sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info