Bedienungsanleitung Korg ESX-1 (Seite 51 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

5. Pattern mode

Effects

Using the effects

The ESX-1 contains three separate effect processors. For each pattern, you can use

up to any three of the sixteen effect types. The sound of each part can be sent to

any one of the effect processors. You can also change the way in which the three

effects are connected to each other, and in this way apply more than one effect to

a part.

To apply an effect

1. Either begin playback, or if you are editing a keyboard part, turn

the KEYBOARD key on (lit) so that you can play the sound.

2. Press a drum or keyboard part key to select the part to which you

want to apply an effect.

3. In the edit section / part common area, press the FX SELECT key to

select the effect processor that you want to use. Press the FX SEND

key (lit) to send the sound of that part to the selected effect proces-

sor.

4. In the edit section, press the effect FX CHAIN key to select how the

effects will be connected.

The function of the knobs will differ depending on the effect type

(☞p.53 “Effect parameters”).

If you have difficulty editing because a motion sequence is affecting

a knob, turn off the motion sequence while you edit (☞p.68 “Motion

sequence”).

You can turn effects on/off individually for each part. However if two

or more parts are being sent to the same effect, you cannot change

the effect type or effect parameter values individually for each part.

To edit an effect

1. In the edit section, press the effect EDIT SELECT key to select which

effect processor you want to edit.

2. In the edit section, use the effect type selector to select the desired

effect type.

3. Use the effect knobs and keys to edit the effect. The original value

icon will light to indicate that knob positions and key settings are

the same as in the unedited effect.

If you want to save the pattern with the effect edits you made here,

press the WRITE/RENAME key (☞p.74 “Saving a pattern”).

EDIT SELECT ...........................................................................

Press this key to select the effect that you want to edit.

EFFECT TYPE ...........................................................................

Use this knob to assign one of the 16 effect types to the currently

selected effect processor.

FX EDIT1.................................................................................

Adjusts the character of the effect. The result will depend on the

effect type.

FX EDIT2.................................................................................

Adjusts the character of the effect. The result will depend on the

effect type.

FX CHAIN ..............................................................................

Specifies how the effects are connected. Each time you press this,

the connection will change; connections whose indicator is lit will

be active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info