Bedienungsanleitung Korg ESX-1 (Seite 90 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

MIDI Utility

Here you can make MIDI filter settings, assign drum note

numbers, assign control change numbers, and transmit/

receive MIDI data.

Making MIDI filter settings

MIDI FILTER ...................................................

You can select which MIDI messages the ESX-1 will

receive and transmit.

1. Press the Global key.

2. Hold down the shift key and press step key 15

(MIDI UTILITY) (key 15 will blink). The param-

eter display will indicate “MIDI Util.”

3. Make sure that the value display indicates “Filter,”

and press key 15.

4. The parameter display will read “PCEN.”

The characters “PCEN” correspond to four types

of message whose status is indicated by an “O” or

“X” in the value display. If you want a category of

message to be transmitted/received, set its status

to “O.” If you don’t want that category of message

to be transmitted/received, set its status to “X.”

Turn the dial to select “O” or “X” for each category

of message.

P: Program change, bank select, and song

select transmission/reception.

C: Control change transmission/reception.

E: Exclusive data transmission/reception.

However while the MIDI Dump page is

displayed, this data can always be re-

ceived regardless of this setting.

N: Note message transmission/reception.

5. When you have finished making settings, press the

15 key to return to Global mode. (Key 15 will go

dark and the Global mode key will light.) If you

decide to cancel, press the STOP/CANCEL key or

press a mode key.

Assigning the drum note numbers

DRUM NOTE NO. ........................... C-1...G9

You can assign a MIDI note number (as a note

name) for each drum part. If you assign the same

note number for two or more parts, those parts will

sound simultaneously when controlled from an

external MIDI device.

1. Press the Global key.

2. Hold down the shift key and press step key 15

(MIDI UTILITY) (key 15 will blink). The param-

eter display will indicate “MIDI Util.”

3. The value display will indicate “Filter.” Turn the

dial to change this to “DrNote,” and press key 15.

4. Press the drum part key whose note number you

want to assign.

5. The parameter display will show the name of the

selected drum part, and the value display will in-

dicate the corresponding number.

Turn the dial to select the desired note number. For

each drum part that you want to assign, repeat the

steps of selecting the drum part and then selecting

a note number.

6. When you have finished making settings, press key

15 to return to Global mode. (Key 15 will go dark and

the Global key will light.) If you decide to cancel, press

the STOP/CANCEL key or press a mode key.

With the factory settings, the drum note numbers

are assigned as follows.

Part Note

Drum1 C2

Drum2 D2

Drum3 E2

Drum4 F2

Drum5 G2

Drum6A F



Drum6B A



Drum7A C



Drum7B D



Stretch1 A-1

Stretch2 A#-1

Slice B-1

Audio in C0

The correspondence between note names and note

numbers may differ for devices of different manu-

facturers. Please check this correspondence for the

device you are connecting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info