Bedienungsanleitung Korg ESX-1 (Seite 88 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Deleting an ESX-1 file from

SmartMedia (Delete File)

Here’s how a user file containing ESX-1 pattern data, song

data, and global can be deleted from a SmartMedia card.

Once a file has been deleted, it cannot be read

again.

1. Insert the SmartMedia card into the SmartMedia

slot.

2. Press the GLOBAL key. (It will light.)

3. Hold down the Shift key and press step key 16

(CARD) (key 16 will blink). The parameter display

will indicate “CardMenu.”

4. The value display will indicate “Load.” Turn the

dial to select “Delete” and then press key 16.

5. Select the user file that you want to delete. Select

ES files, and then press key 16.

6. The parameter display will ask “Sure?” and the

value display will read “No.” Turn the dial to

change this to “Yes” and press key 16 to execute

the Delete operation. While the file is being deleted,

the step keys will indicate the state of progress.

Deleting a WAVE or AIFF file

from SmartMedia

Here’s how to delete a WAVE or AIFF file from SmartMedia.

1. Insert the SmartMedia into the SmartMedia slot.

2. Press the GLOBAL key. (The key will light.)

3. Hold down the SHIFT key and press step key 16

(CARD). (Key 16 will blink.) The parameter dis-

play will show “CardMenu.”

4. The value display will show “Load.” Turn the dial

to make this read “Delete,” and then press key 16.

5. Select the type of file that you want to delete. Se-

lect WAVE or AIFF files, and then press key 16.

6. Select the file that you want to delete. The param-

eter display will show “(file name).” Turn the dial

to select a file, and press key 16.

7. The parameter display will show “Sure?” Turn the

dial to make the value display read “Yes,” and then

press key 16 to execute the Delete operation. While

the file is being deleted, the step keys will show

the progress of execution.

About WAV/AIFF file formats

When the ESX-1 saves/loads data, it references the

following chunks.

WAV files (Import/Export)

The Format chunk, Sample chunk, and Data chunk

are used.

Format chunk ('fmt')

The ESX-1 can handle Wave file formats with the follow-

ing Format chunk settings.

Format: standard PCM format

Channel: 1 (Mono) / 2 (Stereo)

BitsPerSample: 8/16 bit

8-bit data is expanded into 16-bit data by adding zeros

to the lower 8 bits.

Sampling Rate: 11,025~96,000 (Hz)

In cases other than 44,100 Hz, the Tune parameter of the

sample will be adjusted during loading so that the play-

back pitch is correct.

Sample chunk ('smpl')

When importing a WAV file created by other hardware

or software, the ESX-1 will import only the Loop data,

and will apply this to its own Loop Start parameter.

When exporting data, the Sample chunk will be written

according to the loop settings specified within the ESX-

When importing

The first loop set in List Of Sample Loops will be loaded.

When Loop data is loaded, the ESX-1's End parameter

will be overwritten by the Loop End specified within the

Sample chunk.

When exporting

If a loop is specified for a sample on the ESX-1, a Sample

chunk will be created when the wave is created.

The following parameters are specified.

Manufacturer: 0x42

Product: 0x71

SamplePeriod: specifies the sampling frequency of the

sample

MIDI Unity Note: 0x3C

Num Sample Loops: 1

List of Sample Loops: one loop, according to the ESX-1's

LoopStart and EndPoint settings

Data chunk ('data')

This is the wave sample data itself.

AIFF files (Import only)

The Common chunk and SoundData chunk are rec-

ognized.

Common chunk ('COMM')

Channel: 1 (Mono) / 2 (Stereo)

BitsPerSample: 8/16 bit

8-bit data is expanded into 16-bit data by adding zeros

to the lower 8 bits.

Sampling Rate: 11,025~96,000 (Hz)

In cases other than 44,100 Hz, the Tune parameter of the

sample will be adjusted during loading so that the play-

back pitch is correct.

SoundData chunk ('SSND')

This is the AIFF sample data itself. Offset and block size

are ignored. (Block-Aligning Sound Data is not sup-

ported.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info