Bedienungsanleitung Korg ESX-1 (Seite 86 von 108) (Englisch)

500314

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

5. The parameter display will indicate “Load” and the

value display will indicate “All” Press key 16.

If you select “PSG” here, only the pattern, song, and glo-

bal data will be loaded.

6. Select the file that you want to load. The value dis-

play will indicate “LdFile,” and the parameter dis-

play will show “(six characters of the filename).” Turn

the dial to select the desired file, and press key 16.

7. The parameter display will ask “Sure?” and the

value display will read “No.” Turn the dial to

change this to “Yes,” and press key 16 to execute

the Load operation. While the data is being loaded,

the step keys will indicate the state of progress.

When loading is completed, the ESX-1 will enter

Pattern mode with A01 selected.

If you decide to cancel, press the STOP/CANCEL key.

With the factory settings, memory protect is turned

on, so you will not be able to execute this opera-

tion. Turn memory protect off before you execute

the Load operation (☞p.84 “Saving your Global

mode settings”).

Loading a single pattern from

SmartMedia (Load Pattern)

1. Insert the SmartMedia card into the SmartMedia

slot.

2. Press the GLOBAL key. (It will light.)

3. Hold down the Shift key and press step key 16

(CARD) (key 16 will blink). The parameter display

will indicate “CardMenu.”

The value display will indicate “Load.” Press key 16.

5. The parameter display will indicate “Load” and the

value display will indicate “All.” Turn the dial to

select “1Ptrn” and then press key 16.

6. Select the file (the filename you specified for Save

All) that contains the pattern you want to load. The

value display will indicate “LdFile” and the param-

eter display will show “(six characters of the

filename).” Turn the dial to select the desired file,

and then press key 16.

You can use files that were saved by the ES-1 (an earlier

model in this series). When you select an ES-1 file, the dis-

play will indicate “(ES1).” However since some of the pa-

rameters are not compatible, the sound may be differ

ent.

7. Select the pattern that you want to load. The pa-

rameter display will indicate “Load” and the value

display will show the “(pattern number)” (you can

hold down the shift key to display the pattern name

instead). Turn the dial to select the desired pattern,

and press key 16 to load it.

When loading is completed, you will return to Pat-

tern mode (key 16 will go dark, and the PATTERN

key will light).

If you decide to cancel, press the STOP/CANCEL

key.

Be aware that this procedure does not save (write)

the pattern into internal memory.

With the factory settings, memory protect is turned

on, so you will not be able to save data. Turn

memory protect off before you execute the Write

operation (☞p.84 “Saving your Global mode set-

tings”).

Loading a pattern does not load the samples used

by the pattern.

Saving just a single sample on

SmartMedia

Here’s how to save ESX-1 sample data on SmartMedia.

1. Insert the SmartMedia into the SmartMedia slot.

2. Press the GLOBAL key (the key will light).

3. Hold down the SHIFT key and press step key 16

(CARD). (Key 16 will blink.) The parameter dis-

play will show “CardMenu.”

4. The value display will show “Load.” Use the dial

to make it read “Save,” and press key 16. The pa-

rameter display will show “Save.”

5. The value display will show “All.” Use the dial to

make it read “Sample,” and press key 16.

6. Select the sample that you want to save. The pa-

rameter display will show “SelSmpl,” and the value

display will show “(sample number within the

ESX-1’s memory).” (At this time you can press the

SHIFT key to see the name of the sample.) Turn the

dial to select the number you want to save. Then

press key 16.

7. Assign a name to the sample. Use the [ ]/[ ] cur-

sor keys to move the cursor to left or right, and

turn the dial to select characters.

8. Press key 16 to execute the Save operation. While

the sample is being saved, the step keys will indi-

cate the state of progress.

When saving is complete, the display will return

to its state prior to the Save operation. (Key 16 will

go dark.)

If you decide to cancel, press the STOP/CANCEL key.

You cannot save if a write-protect label is affixed to

the SmartMedia. Remove the write-protect label

from the SmartMedia before you save data on it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg ESX-1 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info