Bedienungsanleitung Korg KingKorg (Seite 20 von 116) (Deutsch, Englisch, Französisch, Spanisch)

707401

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

KingKORG Owner’s manual

About global settings

Switch to Global mode when you want to change settings that apply to

the entire KingKORG or when you want to make MIDI‐related settings.

Global mode contains various settings such as master tune,

transpose, and global MIDI channel. (PG: “5. GLOBAL parameters”)

Changes you make to these settings will be lost if you turn off

the power without saving. Be sure to save your settings if you

want to keep them. (OM: p.21 “1. Saving global settings”)

Other functions

1. Initializing a program

Here’s how to initialize the settings of the selected program.

This procedure will initialize the settings of the that’s being

edited program. It will not change the contents stored in

internal memory.

If you want to save the initialized state, save the program.

(OM: p.21 “2. Saving a program”)

1. Select the program that you want to initialize. (OM: p.13

“Selecting a program”)

2. Use the PAGE +/- buttons to access the PROGRAM “u01:

Utility” page, and press the value dial.

A screen will ask you to confirm that you want to initialize the

program.

TIP:

If you decide not to initialize, press the SHIFT/EXIT buon.

3. Press the value dial once again.

When initialization is finished, the display will indicate

“Complete!” and you will automatically return to the top screen.

2. Copying a timbre

Here’s how you can copy the settings of another program’s timbre to

a timbre (either A or B) of the currently selected program.

This operation recalls settings to a timbre of the program that’s

being edited . It will not change the contents stored in internal

memory.

Only one timbre can be copied at a time.

1. First select the program that includes the copy-destination

timbre. (OM: p.13 “Selecting a program”)

2. Use the PAGE +/- buttons to access the PROGRAM “u02:

Utility” page, and press the value dial.

3. Turn the value dial to select the program that contains the

copy-source timbre, and press the dial to confirm your selection.

When selecting a program, the TIMBRE A or B select button will

light depending on the timbres used by the copy‐source

program.

The TIMBRE A or B select buttons will not respond if you

press them at this time.

4. Confirm the copy-source timbre.

If the copy‐source program uses two timbres, the copy‐source

timbre button will blink. Select the desired timbre if necessary,

and press the value dial to confirm your selection.

TIP:

While the TIMBRE A or B select buon is blinking, you can

also make your choice by pressing a buon.

5. Confirm the copy-destination timbre.

If the copy‐destination program uses two timbres, the TIMBRE

A or B select button will blink. As necessary, turn the value dial

to select the copy‐destination timbre, and press the value dial to

confirm your selection.

6. A confirmation screen will appear in the main display; verify

the settings, and press the value dial.

When the copy is completed, the display will indicate

“Complete!” and you will return to the top screen of the “u02:

Utility” page.

TIP:

If you want to save the copied state, save the program. (OM:

p.21 “2. Saving a program”)

TIP:

You can press the SHIFT/EXIT buon to return to the previous

step. If you decide not to copy a timbre, press the SHIFT/EXIT

buon several times.

3. Restoring the factory settings

Here’s how to restore the KingKORG’s programs and global data

settings to their factory‐set condition. The factory settings are called

the “preload data.” To return to the factory‐set state, execute the

Load Preload operation.

When you execute Load Preload, the factory set data will

overwrite the data you’ve saved in internal memory. Make

sure that you don’t mind losing this data.

Do not touch the KingKORG’s knobs or keyboard while the

Preload operation is in progress. Never turn off the power

during this process.

Of factory‐set programs 1–300, programs 201–300 (programs

containing no preset data) will not return to their factory‐set

state. If programs are saved in these locations, they will remain

in that state.

You can’t execute the Load Preload operation if memory

protect is turned on. Turn off memory protect before you

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg KingKorg Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info