Bedienungsanleitung Korg KingKorg (Seite 22 von 116) (Deutsch, Englisch, Französisch, Spanisch)

707401

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

KingKORG Owner’s manual

3. Press the FAVORITES button to select the bank (A–E) where

you want to register the program.

The FAVORITES button will light up, and the bank will change

each time you press the button.

4. Press the category/favorites button where you want to register

the program.

The category/favorites button that you pressed will blink; when

registration is complete, the button will be steadily illuminated.

Never turn off the power while registration is in progress. The

data may be destroyed if you do so.

TIP:

You are free to change a program that’s registered in Favorites.

Select Favorites, turn the dial to select the desired program,

and then press the WRITE buon.

Trouble shooting

If the KingKORG does not function as you expect, check the

following points.

Power does not turn on

Is the AC adapter connected to an AC outlet? (OM: p.11 “Con‐

nections”)

Are you holding down (long‐pressing) the power switch

when turning the power on? (OM: p.12 “Turning the power on/

o”)

No sound when you play the keyboard

Is your powered monitor system or headphones connected to

the correct jack(s)? (OM: p.11 “Connections”)

Is the connected monitor system powered‐on, and is the

volume raised?

Is the VOLUME knob set to a position where sound will be out‐

put?

In the GLOBAL “g17: MIDI Basic” page, is the local control set‐

ting “On”?

Were any volume‐related parameters set to a value of “0”?

In the PROGRAM “s32: Filter” page, could the cuto value be

“0”?

Volume is too soft when the TUBE control is turned on

It may be that the vacuum tube is worn out. Please contact a

Korg service center.

Can’t input sound

Is the mic connected correctly to the mic jack?

Could the MIC LEVEL knob be turned all the way to the le?

In a vocoder program, have you specied “Input” for the

audio you’re using as the modulator?

Can’t edit

If turning a knob does not change the parameter:

In the GLOBAL “g11: Common>Knob” page, could the setting

be “Catch”?

If when you turn a knob, the position indicated by the knob

does not match the value shown in the display:

If the GLOBAL “g11: Common>Knob”page setting is set to

“ValueScale,” the actual parameter value may differ from the

position indicated by the knob.

If the sound does not change when you use a knob:

Have you used the TIMBRE A/B select buttons to correctly

select the timbre that you want to edit?

If you can’t select timbre B:

In the PROGRAM “p03: Common” page, could the voice

mode be set to “Single”?

If you can’t select vocoder parameters in Edit mode:

Is the VOCODER button on (lit)?

If the changes you made to a program or to the global seings

have not been remembered, did you turn the power o before

executing the Write operation? In the case of a program, your

edits will also be lost if you select a dierent program. Per‐

form the Write operation to save your edits before you switch

programs or turn o the power.

Can’t save program settings

In the GLOBAL “g12: Common” page, could the protect seing

be “On”?

If the program you edited is not saved, have you used the

value dial to correctly specify the save‐destination (program

number)?

Arpeggiator will not start

Is the arpeggiator on (ARP (TEMPO) buon lit up)?

Is the arpeggiator assigned to a timbre?

In the GLOBAL “g19: MIDI Basic” page, is the clock seing

correct?

No response to MIDI messages sent from an external device

Is the MIDI cable or USB cable connected correctly?

Does the MIDI channel of the data transmied from the exter‐

nal MIDI device match the MIDI channel of the KingKORG?

In the GLOBAL “g23–g27: MIDI Filter” page, is the seing “En‐

able”?

Transpose, velocity curve, and arpeggiator data is not

recognized correctly

In the GLOBAL “g03: Common” page, is the position seing

correct?

Can’t control timbres on separate MIDI channels

If the PROGRAM “p03: Common” page’s voice mode is set to

“Single,” the KingKORG will receive only one MIDI channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg KingKorg Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info