Bedienungsanleitung Korg Kronos (Seite 15 von 305) (Englisch)

707341

Zoom out

Zoom in

Vorherige Seite

1/305

Nächste Seite

Front and rear panels Front panel

1. Hold down the ENTER button.

2. Press a number (0-9) on the numeric keypad to select

the desired menu command, starting with 0.

For instance, press 0 for the first menu command, 1 for the

second, and so on.

If the menu command just toggles an option on and off (such

as Exclusive Solo), then you’re done. If the command calls

up a dialog box, the dialog will appear on the LCD, and you

can proceed just as if you’d selected the command from the

touch-screen.

ENTER + REC/WRITE: Auto Song Setup

The Auto Song Setup feature copies the current Program or

Combination into a Song, and then puts the KRONOS in

record-ready mode.

If inspiration for a phrase or song strikes you while you’re

playing, you can use this function to start recording

immediately. To do so:

1. Hold down the ENTER key and press the

SEQUENCER REC/WRITE key.

The Setup to Record dialog box will open and ask “Are you

sure?”

2. Press OK.

You will automatically enter Sequencer mode, and will be in

the record-ready state.

3. Press the START/STOP key to start the sequencer

and begin recording.

ENTER + keyboard: Enter note or velocity value

Generally, if a parameter specifies a note number or velocity,

you can enter the value by playing on the keyboard. To do

so:

1. Select one of the Key parameters.

2. Hold down the ENTER button.

3. While holding ENTER, play a note on the keyboard.

You can use this shortcut throughout the KRONOS, such as

for setting keyboard and velocity zones, or selecting the note

to edit in Drum Kits, Multisamples, or RPPR setups.

ENTER + LOCATE: Set locate point

This shortcut sets the Sequencer’s locate point to the current

measure, beat, and tick, similar to using the Set Location

menu command (see “Set Location (for Locate Key)” on

page 639 of the Parameter Guide).

1. Hold down the ENTER button.

2. While holding ENTER, press the LOCATE key.

After this, pressing LOCATE returns the Song to the newly

set measure, beat, and tick.

ENTER + touch Program name: Edit Program

You can jump directly into the editing pages of a Program

from within a Combination or Song—while still hearing all

of the other Timbres or Tracks.To do so:

1. Go to the P0–1: Prog Select/Mixer page in

Combination mode, or the P0–1: MIDI Track Prog

Select/Mixer page in Sequencer mode.

2. Hold the ENTER button, and then touch the

Program’s name in the Timbre or Track.

The system will then display the P0 page for the selected

Program. The front-panel PROG button’s LED will blink,

and the COMBI or SEQ LED will remain solidly on, to show

that you are editing the Program in context.

3. Edit as desired.

Eventually, if you want to keep your changes, you’ll need to

Write the Program. However, while you’re working, you can

go back and forth between the edited Program and the

Combination or Song.

To return to the Combination or Song:

4. Press the front-panel COMBI or SEQ buttons.

For more information, including other ways to move

between the modes, see “Editing Programs from within a

Combination or Song” on page 80.

CONTROL ASSIGN RT KNOBS/KARMA switch (LED

ON) + KARMA MODULE CONTROL switch

In Combination and Sequencer modes, this sets the Module

Control to Master. This is the same as setting Module

Control to M in P0: Control Surface– RT/KARMA.

CONTROL ASSIGN TONE ADJ/EQ switch

(LED ON) + SWITCH 1…16 switches

In Combination and Sequencer modes, you can use a

shortcut to change the current Timbre directly from the

Control Surface, without leaving Tone Adjust mode:

1. Press and hold the TONE ADJ/EQ button.

2. While holding TONE ADJ/EQ, press a MIX

PLAY/MUTE or MIX SELECT button to select a

Timbre.

The PLAY/MUTE buttons select Timbres 1–8, and the

SELECT buttons select Timbres 9–16.

This is the same as the selected Timbre/Track in

TIMBRE/TRACK mode; changing one will also change the

other.

3. Release the TONE ADJ/EQ button.

The Control Surface and screen will change to show the

Tone Adjust parameters for the newly selected Timbre.

EXIT switch: Return to main page

This button makes it easy to return to the main page of the

current mode:

• Press it once to go to the previously-selected tab on the

main P0 page.

• Press it again to go to the first tab on the main P0 page.

• Press it a third time to select the main parameter on the

P0 page, such as the Program name in Program mode.

Wherever you are in Program, Combi, or Sequencer modes,

pressing EXIT three times (or fewer) will take you back to

Program/Combination/Song Select, where you can

immediately use the numeric keys or / switches to

select a Program, Combination, or Song.

EXIT switch: Cancel in dialog boxes

When a dialog box is displayed, this has the same function as

the Cancel, Done, or Exit button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kronos Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kronos

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info