Bedienungsanleitung Korg Kronos (Seite 17 von 305) (Englisch)

707341

Zoom out

Zoom in

Vorherige Seite

1/305

Nächste Seite

Front and rear panels Rear panel

When editing sounds, or when setting up a Song in

Sequencer mode, you can access the main outputs by setting

Bus Select to L/R.

If no cable is connected to the R output, L/MONO will carry

a mono summation of the stereo signal. So, if you are

connecting to a device which does not have stereo inputs

(such as a simple keyboard amp), use the L/MONO output.

(INDIVIDUAL) 1…4

These 4 additional audio outputs let you isolate sounds,

audio inputs, or audio tracks for recording or complex live

sound setups.

These can be used as stereo or mono outputs, in any

combination. You can also use the Global Audio page LR

Bus Indiv. Assign parameter to map the main stereo outputs

to any of these output pairs, if you like.

Note that the individual outputs are not affected by the

MAIN VOLUME knob.

6. MIDI

MIDI lets you connect KRONOS to computers or other

MIDI devices, for sending and receiving notes, controller

gestures, sound settings, and so on. For more information on

MIDI connections, please see “MIDI applications” on

page 1143 of the Parameter Guide.

MIDI THRU connector

MIDI data received at the MIDI IN connector is re-

transmitted without change from the MIDI THRU connector.

You can use this to chain multiple MIDI devices together.

MIDI OUT connector

This connector transmits MIDI data. Use this to control

external MIDI devices, or to record into an external

sequencer.

MIDI IN connector

This connector receives MIDI data. Use this to play the

KRONOS from another MIDI device, or from an external

sequencer.

7. S/P DIF IN & OUT

These jacks provide 24-bit, 48kHz optical S/P DIF input and

output, for connecting to computer audio systems, digital

mixers, etc.

Optical S/P DIF is sometimes called TOSLINK, and

formally named (hold your breath!) IEC60958, EIAJ CP-

1201. Make sure to use optical cables designed for digital

audio.

Whenever you use digital audio connections, make sure that

all connected systems are set so that there is one and only

one word clock master. You can set the word clock for the

KRONOS using the Global page System Clock parameter.

For more information, see “System Clock” on page 766 of

the Parameter Guide.

OUT(MAIN) jack

This optical S/P DIF output carries a digital version of the

main L/R outputs.

Note that the MAIN VOLUME knob does not adjust the

S/P DIF output level.

IN jack

You can use this optical S/P DIF input for recording,

sampling, and real-time mixing through the built-in effects.

It can be used simultaneously with the analog and USB

audio inputs, if you like.

8. Pedals

DAMPER jack

For the damper–also known as the sustain pedal– you can

connect either a standard footswitch, or Korg’s special half-

damper pedal, the optional DS-1H.

The DS-1H is a continuous pedal designed specifically for

piano-style damper control, with the look and feel of an

acoustic piano’s sustain pedal. It allows more subtle control

of the damper than a simple switch; the further down you

press the pedal, the more that the sound sustains. For more

information, see “Half-Damper Pedal and Release Time” on

page 45 of the Parameter Guide.

You can also connect a simple footswitch, which will work

as a standard on/off damper pedal.

In order to ensure that the pedal functions correctly, please

adjust the switch polarity (see “Damper Polarity” on

page 792 of the Parameter Guide) and the half-damper

sensitivity (see “Half Damper Calibration” on page 817 of

the Parameter Guide).

ASSIGNABLE SWITCH jack

This lets you connect a simple on/off footswitch, such as the

optional Korg PS-1. The footswitch can perform a wide

variety of functions, such as modulating sounds and effects,

tap tempo, sequencer start/stop, etc.

The switch’s function is set in Global mode (on the

Controllers tab of the Controllers/Scales page), so that it

always works the same regardless of the current Program,

Combi, or Song. For more information, please see “Setting

up the Assignable Switch and Pedal” on page 181.

ASSIGNABLE PEDAL jack

This lets you connect a continuous controller pedal, such as

the Korg EXP-2 foot controller or Korg XVP-10 EXP/VOL

pedal, to use as an assignable modulation source.

Like the ASSIGNABLE SWITCH, the pedal’s function is

set in Global mode. For more information, please see

“Setting up the Assignable Switch and Pedal” on page 181.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kronos Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kronos

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info