Bedienungsanleitung Korg Kronos (Seite 295 von 305) (Englisch)

707341

295

Zoom out

Zoom in

Vorherige Seite

1/305

Nächste Seite

Error and confirmation messages W (Wave)

287

USB HUB Power exceeded

Please disconnect USB device

Meaning: The power consumption of your USB devices has

exceeded the capacity of the hub to which they are

connected. The USB hub will not be recognized correctly in

this state. To solve this problem:

• If you’re using a USB hub or device that is capable of

being self-powered, use it in self-powered mode.

• If you are using more than one USB hub, try connecting

the device to a different USB hub.

W (Wave)

.WAV already exists. Overwrite?

Meaning: When importing a WAVE file that requires

conversion to 48kHz/mono, a file of the same name already

exists on the disk. To solve this problem:

• Either delete the existing file, or rename it before

importing.

WAVE files on this external medium will

not be played with sequencer audio track

playback. Copy SNG and WAVE Directory

to Internal HDD, and load SNG from

internal HDD

Meaning: The WAVE file used by the SNG data you’re

loading in Disk mode exists on external media, and will not

play back correctly when loaded. Audio track recording and

playback is available only on the internal disk. To solve this

problem:

• Copy the .SNG file and the directory for that .SNG file

(the directory containing the WAVE files it uses) to the

same directory of the internal disk, and then load the data

again.

WAVE file size over limit

Meaning: When editing an audio track in Sequencer mode,

you exceeded the maximum number of 230,400,000 samples

(80 minutes at a sample rate of 48 kHz, 16-bit) allowable in a

WAVE fil e.

Y (You)

You can’t undo this operation

Are you sure?

Meaning: Once you enter event editing (even if you leave

event editing without actually editing an event), it will no

longer be possible to execute a Compare of the previous edit.

If you wish to enter event editing, press the OK button. To

cancel, press the Cancel button.

You can’t undo last operation

Are you sure?

Meaning: When you exit recording or event editing in

Sequencer mode, the memory area for Undo (Compare

function) is not allocated. If you wish to keep the data that

was just recorded or edited, press the OK button. If you wish

to return to the previous data (i.e., to delete the data that was

just recorded or edited), press the Cancel button.

Meaning: When editing in Sequencer mode, memory area

for Undo (Compare function) cannot be allocated. If you

wish to execute the edit, press the OK button. (It will not be

possible to return to the state before editing.) If you decide

not to execute the edit, press the Cancel button.

• In order to allocate memory area for Undo (Compare

function), delete unneeded data such as songs, tracks, or

patterns. We recommend that you save data to media

before you execute the edit operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kronos Seite 295

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kronos

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info