Bedienungsanleitung Korg Kronos (Seite 297 von 305) (Englisch)

707341

297

Zoom out

Zoom in

Vorherige Seite

1/305

Nächste Seite

Disk and Media information Restoring the factory settings

289

Restoring the factory settings

Restoring the original sounds

You can easily restore the Programs, Combinations, Drum

Kits, Wave Sequences, Set Lists, and EXs samples to their

original state as shipped from the factory. This is done by

loading the PRELOAD.PCG file, which is included both on

Accessory Disc 3 and the internal disk.

This operation will erase all of the internal KRONOS

sounds. If there are any non-factory sounds that you want

to keep, save them to disk now! For more information,

see “Saving data” on page 199.

Make sure that Memory Protect is off

Before loading, make sure that Memory Protect is turned

off:

1. Press the front-panel GLOBAL button.

2. Go to the Basic tab of the Basic Setup page.

3. Make sure that all of the Memory Protect check-boxes

are not checked.

Loading from the internal disk

Generally, it will be more convenient to load sounds from

the internal disk:

1. Press the DISK button to enter Disk mode.

2. Go to the Load tab of the File page.

3. Use Drive Select to select HDD.

The LCD screen will show the files and folders on the

internal disk.

4. Touch the FACTORY folder to select it.

5. Press the on-screen Open button.

The LCD will now show the contents of the FACTORY

folder.

6. Select the PRELOAD.PCG file.

7. Press the Load button.

The Load PCG dialog box will appear.

8. Use “.PCG Contents” to select the data you want to

load. To completely restore the factory sounds, select

All.

“All” will load all of the factory sounds, including Programs,

Combinations, Set Lists, Drum Kits, Wave Sequences, and

Drum Track patterns.

For more information on the factory sounds, see “Program

bank contents” on page 31, “Combination bank contents” on

page 67, “Drum Kit memory structure” on page 195, and

“Wave Sequence banks” on page 187.

9. Set “.KSC Allocation” to Clear All.

10.Set the Load Method for EXs and User Sample Banks

to KSC Settings.

11.Press the OK button to load the data.

Next, to make sure that the KSC loads automatically at

startup:

12.Go to the Global Basic—KSC Auto-Load page.

13.In the list of KSCs, check the Auto-load box next to

PRELOAD.KSC.

14.Un-check all of the other KSCs.

Loading from Accessory Disc 3

If the sounds have somehow been erased from the internal

drive, you can also load them from Accessory Disc 3:

1. Insert the included Accessory Disc 3 into a connected

USB DVD drive.

2. Press the DISK button to enter Disk mode.

3. Wait for a few seconds, to give the KRONOS time to

recognize the disk.

4. Go to the Load tab of the File page.

5. Use Drive Select to select CDD.

The LCD screen will show the files and folders on the disk.

6. Follow the instructions in steps 4 through 14 under

“Loading from the internal disk,” above.

Never attempt to remove media while data is being

loaded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kronos Seite 297

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kronos

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info