Bedienungsanleitung Korg Kross 2 (Seite 8 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Introduction to the KROSS

toward yourself, the effect will be zero. The modulation wheel

will stay in its position when you release it, and the effect will

continue.

The function that is controlled by the wheel is assigned by the

program parameters or effect parameters. Although different

effects are assigned for different programs and combinations, a

vibrato effect which cyclically varies the pitch is typically

assigned to the modulation wheel.

3. VOLUME knob

This knob adjusts the volume of the OUTPUT L/MONO, R

outputs, as well as the volume of the headphone jack. (see

page 17)

4. ARP (Arpeggiator) button

This button turns the arpeggiator on/off. The button will be lit up

if the arpeggiator is on. (see page 73)

5. DRUM TRACK button

This button turns the Drum Track function on or off. This button

also indicates the operating state of the drum track.

Unlit: off, Blinking: waiting for trigger, Lit: on (see page 83)

6. REALTIME CONTROLS

When you're playing a program or combination,you can use these

to adjust the sound or the effects, or to make simple edits. Here

you can also turn the external audio input on/off, adjust the

vocoder function, and adjust the tempo of the arpeggiator or

sequencer.

For details on operating each parameter and on saving your

changes, see PG p.311.

Note:

REALTIME CONTROLS can be used when the SELECT

LED is lit. They cannot be used when the LED is unlit.

SELECT button, SELECT LED

This selects the functions that are controlled by the SWITCH

button, KNOB 1 button, and KNOB 2 button. Each time you

press the button, the functions being controlled are switched, and

the SELECT LED is lit.

The functions controlled by the SELECT button are saved for

each program, combination, or song.

SWITCH button, SWITCH LED

Each time you press this button, the function selected by the

SELECT button turns on or off. If the function selected by the

SELECT button is on, the SWITCH LED is brightly lit. The

SWITCH LED is dimly lit for functions that are not selected by

the SELECT button, letting you see the on/off status of those

functions. The TAP LED blinks according to the tempo setting.

When you operate the button, the parameter name and value of

the selected function appears in the display for a time.

Tips:

If you long-press the SELECT button, a list of the selected

functions appears. After a time, you return to the previous page or

window.

Note:

Display indications return to the previous page or window

after a certain time has passed.

KNOB1 knob, KNOB2 knob

Turn these knobs to edit the functions selected by the SELECT

button. If you edit a setting and then use the SELECT button to

select another function, the state or value edited by the KNOB 1

and 2 knobs is preserved. However, be aware that if you re-select

the program etc., the program-related knob values are reset to the

center position.

Tips:

When you operate a knob, the function and value that you

operated are shown. After a time, you return to the previous page

or window.

Note:

Display indications return to the previous page or window

after a certain time has passed.

7. Modes

Press one of these buttons to enter the corresponding mode. The

KROSS has four operating modes. The currently selected mode

button will be lit up. (see “Selecting modes” on page 12)

PROG button

This button selects Program mode. Programs are basic sounds; in

Program mode you can play and edit programs.

COMBI button

This button selects Combination mode. Combinations are sets of

programs with split or layer settings; you can use a combination to

create sounds that are more complex than a program. In

Combination mode you can play and edit combinations.

SEQ button ( )

This button selects Sequencer mode. In this mode you can record,

play, and edit MIDI songs.

By pressing the EXIT button ( ) and the SEQ button

( ), selects Global/Media mode. In this mode you can

adjust overall settings for the KROSS, edit drum kits and

arpeggio patterns, and save or load data using an SD card.

8. CATEGORY dial, LED

Use this dial to select the sound category of the program or

combination.

9. Quick layer/split

Here you can easily create layered or split sounds using two

programs.

Select the first sound in Program mode; then press this button. In

the dialog box that appears, select the second sound and specify

its volume; then confirm the settings.

Choose LAYER if you want the two sounds to play together

across the entire keyboard; choose SPLIT if you want the two

sounds to play separately in the high and regions of the keyboard.

Note:

A layer or split sound that you create can be saved as a

combination.

Tips:

If you want to adjust more sophisticated settings in order to

obtain more complex sounds, use Combination mode.

LAYER/SPLIT button

When you press the LAYER/SPLIT button, the QUICK LAYER

dialog box or the QUICK SPLIT dialog box appears.

In the QUICK LAYER dialog box, pressing the PAGE+

(



SPLIT) button opens the QUICK SPLIT dialog box. In the

QUICK SPLIT dialog box, pressing the PAGE- (LAYER



)

button opens the QUICK LAYER dialog box.

QUICK LAYER DIALOG

A program of the strings category is layered with the currently

selected program. Select a program to layer, and adjust the

volume and octave settings. By pressing the MENU (WRITE)

button you can save the settings to a user combination bank. (see

page 29)

Korg Kross 2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info