Bedienungsanleitung Korg Kross 2 (Seite 10 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Introduction to the KROSS

By using the EXIT button together with another button, you can

perform the following functions.

ENTER button

Use this button to perform a function, select an radio button, or to

turn a check box on/off.

When you select a parameter and press the ENTER button, you’ll

be able to use the



cursor buttons to edit the value. After

you’ve edited the value, press the ENTER button to confirm the

change.

When you press the ENTER button on the MAIN page of

Program or Combination mode, a sound select list will appear.

◄►▲▼ Cursor buttons

Use these buttons to move the cursor in the display. Move the

cursor up/down/left/right to select the parameter that you want to

edit.

If the page contains more parameters than can be shown on a

single screen, a



symbol is shown to the left of the screen,

and you’ll be able to scroll the page up/down. (see “j: Scroll” on

page 8)

You can also use the



buttons to increment or decrement the

value in steps of 1. (see “ENTER button and ▲▼ cursor buttons”

on page 13)

14. SEQUENCER

You’ll use these buttons in Sequencer mode to record and play

back MIDI.

(REC) button ( )

Pressing this button will enter record-ready mode. Once you’re in

record-ready mode (shown by the button’s light), you can begin

recording by pressing the SEQUENCER (start/stop)

button. For details, please see “Recording MIDI in real time” on

page 61.

By pressing this (REC) button in Program mode or

Combination mode, you can instantly access the Auto Song Setup

function which lets you start recording immediately. (see

page 60)

Hold down the EXIT button( ) and press the (REC)

button ( ) to instantly move the song playback position

to the specified location. By default, this will be the first beat of

the first measure. You can also specify a desired location by using

a function command.

(start/stop) button

This button starts or stops recording and playback.

15. Pad section

1-16 Pad

Use pads 1-16 to control the step sequencer, favorites, sampler,

and audio play.

You can switch the function of pads 1-16 by pressing the

ACTIVE button( ) that corresponds to each function,

making it light. By pressing an ACTIVE button ( )

together with the EXIT button ( ), you can access the

setup page for each function.

STEP SEQ (Step Sequencer)

The

step sequencer

lets you easily create drum loop patterns by

using pads 1–16 to turn the notes on/off that are played by the

kick, snare, and hi-hat etc.

ACTIVE button ( )

This button indicates and changes the on/off status of the step

sequencer. If this is lit, you can use pads 1-16 to control the step

sequencer. (see page 89)

When you hold down the EXIT button ( ) and press this

button, the STEP SEQ EDIT page for Program, Combination, or

Sequencer mode will appear, allowing you to turn steps on/off

and to specify the pattern's resolution, length, and the sound used

for each tone.

Note:

If the favorites select screen is shown, holding down the

EXIT button ( ) and pressing this button does not show

the STEP SEQ EDIT page.

While the STEP SEQ EDIT page is shown, you can hold down

the ACTIVE button and press pads 1-13 to select the tone (e.g.,

kick, snare, accent) that will be controlled by pads 1-16.

By holding down the ACTIVE button and pressing a key, you can

select the sound (instrument) that’s actually played by each tone.

(see page 90)

RUN button

When you press the RUN button (the button will be lit), the step

sequencer will begin playing. You’ll hear the drum loop pattern

that’s specified by pads 1–16.

When you press the RUN button once again (the button will be

unlit), the step sequencer will stop playing.

FAVORITES

The

Favorites function

lets you use pads 1–16 to instantly

recall frequently-used programs, combinations, or audio songs

for the audio recorder to play. You can use this function to

during a live performance in the order that they will be needed.

Button or dial used

with EXIT

Functions

SEQ button ( )

Selects Global/Media mode.

If while in Global/Media mode you

once again press the EXIT button

()

and SEQ button

( ), you'll jump to the MEDIA

>FILE page.

AUDIO REC

(play/pause) button

(

)

Opens the AUDIO RECORDER

SETUP window.

SEQUENCER

(REC) button

(

)

In Sequencer mode, moves to the

previously-specified playback start

position. (see page 56)

STEP SEQ ACTIVE

button (

)

Opens the STEP SEQ EDIT page.

FAVORITE ACTIVE

button (

)

Enters the Add to Favorite registration-

ready state.

SAMPLER ACTIVE

button (

)

Opens the SAMPLER SETUP

window.

SAMPLER HOLD

button (

)

Puts the pad sampler in mute mode

AUDIO PLAY ACTIVE

button (

)

Opens the AUDIO PLAY SETUP

window.

VALUE dial Adjusts the contrast. (see above)

REALTIME

CONTROLS SELECT

button

Selects the parameter to be controlled

in reverse order.

BANK SELECT button

Selects favorites, pad sampler, and pad

audio play banks in reverse order.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info