Bedienungsanleitung Korg Kross 2 (Seite 29 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Connections Connecting foot controllers

The AUDIO IN -QUICK SETTING- dialog box can be

opened from the FUNCTION (QUICK SETTING) button

shown in the lower left when you operate an audio-related

parameter in REALTIME CONTROLS.

In the upper left, [G-SET], [PROG] (or [COMBI], [SEQ])

indicate whether the global settings (G-SET) or the

individual settings are specified.

Global setting (G-SET)

Individual setting (PROG, COMBI, SEQ)

The global setting dialog box contains a PAGE+ (WRITE G-

SET) button; by pressing this button you can save the edited

settings as global settings. For individual settings, press the

MENU (DONE) button to close the dialog box, and use the

appropriate Write function to save the settings. For details on

how to save, please see “Writing a Program or Combination”

on page 122.

Only in the case of input gain (Gain), the global

setting (G-SET) and the individual setting are

shared. Use the global setting (G-SET) to save the

setting. Although you can edit this in the AUDIO IN

page or the QUICK SETTING dialog box of each

mode, you can’t save it as an individual setting

(PROG, COMBI, SEQ).

To create individual settings

In addition to using the AUDIO IN -QUICK SETTING-

dialog box, you can also adjust this setting in the INPUT/

CTRL> AUDIO IN page of each mode. For a program,

combination, or MIDI song that uses G-SET, the upper left

of the screen will show the G-SET indication selected. By

clearing this selection you can adjust individual settings.

Connecting foot controllers

If you connect an optional damper pedal, foot switch, or foot

pedal, you’ll be able to control the KROSS using your feet.

Connecting a damper pedal

When you press the damper pedal, the notes you’ve pressed

will be sustained so that they will continue even after you

take your hands off the keyboard. This is also called a

sustain pedal; it has the same function as the damper pedal of

an acoustic piano.

If the optional Korg DS-1H damper is connected, you’ll be

able to take advantage of the “half-damper” effect, where the

depth that you press the pedal will vary the amount of

damper that’s applied. If any other type of pedal is

connected, it will function as a damper switch.

In Combination or Sequencer mode, you can also select

settings so that the damper will be applied to some sounds

but not to other sounds.

1. Connect a Korg DS-1H damper pedal to the

DAMPER jack.

2. Set the polarity of the switch.

In the G-INPUT/CTRL> FOOT page, set the Damper

Polarity parameter.

If you’re using the DS-1H, choose the (–) KORG

Standard setting. With the factory settings, (–) KORG

Standard is selected. If the operation is inverted when you

use a foot switch other than the DS-1H, simply set the

polarity to the (+) setting.

Note: The half-damper sensitivity is adjusted to a standard

value when the KROSS is shipped from the factory. If the

half-damper pedal you’re using does not respond

appropriately, please adjust the sensitivity. (see page 177 of

the Parameter Guide)

Connecting a foot switch

This lets you use a simple foot switch, such as the Korg PS-1

or PS-3, as an assignable controller. The foot switch can

perform a wide variety of functions, such as:

• Selecting programs or favorites

• An assignable source for modulating sounds and effects

• Portamento on/off

• Sequencer start/stop or punch in/out

• Starting, pausing, and stopping audio recorder playback

or recording

•Tap Tempo

• Arpeggiator on/off

• Switch the Drum Track on/off

• Step sequencer RUN on/off

• Use various KROSS controls (modulation wheel, SW1/

SW2, etc.)

This button will always function in the same way regardless

of the Program, Combination, or Song you’ve selected. You

can assign the function in the Global/Media mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info