Bedienungsanleitung Korg Kross 2 (Seite 89 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Drum Track function

Performing with the Drum

Track function

The Drum Track function makes it easy to play the KROSS’s

high-quality drum programs using a wide variety of Drum

Track patterns.

It provides a convenient way for you to hear Drum Track

patterns while you try out various phrases on a program or

combination, or work out the outline of your song. Then,

when you’ve come up with some ideas, you can use the Auto

Song Setup function to immediately start recording in

Sequencer mode.

You can use preset drum patterns that cover a wide range of

musical styles.

The Drum Track pattern will start immediately when you

press the DRUM TRACK button, or when you play the

keyboard after pressing the DRUM TRACK button. If

you’re starting the pattern by playing the keyboard, you have

the option of starting it by using a specific range of notes or

velocities.

The Drum Track can also play in synchronization with the

arpeggiator.

In Program mode, the drum track has a dedicated mixer

channel and effect routing, allowing you to control the drum

track independently from the sound of the program itself. In

Combination and Sequencer modes, the drum track is

handled as a conventional timbre or track, allowing you to

select programs, and specify the effect routing in the same

way as for conventional timbres or tracks.

Using the Drum Track function in

Program mode

Playing and stopping the Drum Track

1. In Program mode, select a program. (see “Selecting

Programs” on page 27)

2. Press the DRUM TRACK button to turn the Drum

Track on.

The DRUM TRACK button will light up or blink,

depending on the setting (Trigger Mode) of the program.

If lit: The Drum Track pattern will start according to the

Sync setting. When you turn it off, the pattern will stop.

(This will occur if the Trigger Mode parameter is set to

Start Immediately.)

If blinking: The Drum Track pattern will be ready to start.

It will start when you play the keyboard or when a MIDI

note-on message is received. (This will occur if the

Trigger Mode parameter is set to Wait KBD Trigger.)

3. Press the DRUM TRACK button once again to stop

the Drum Track (the button will be unlit).

Changing the tempo

• Use the TEMPO controls of REALTIME CONTROLS

to adjust the tempo of the KROSS. (→ p.15)

Selecting the Drum Track pattern and Drum

Track program

1. In the Program mode page P-DRUM

TRACK>PATTERN, use Pattern No. to select a drum

track pattern.

2. In the P-DRUM TRACK> PROGRAM page, the

Drum Track Program parameter selects the program

that will play the Drum Track patterns.

Note: You can only select programs from the DRUM/

SFX category.

Note: If you’ve selected an empty pattern, the DRUM

TRACK button will not function.

Setting the volume, mute, and solo for the

drum track pattern

In the PROG> MIXER page you can edit the volume, mute,

and solo settings. (see page 32)

Preset 001...772 Preset Drum Track patterns

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info