Bedienungsanleitung Korg Kross 2 (Seite 87 von 152) (Englisch)

707348

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Regarding arpeggiator synchronization “Key Sync.” parameter

Dual arpeggiator editing

Here we will use a combination as an example in our

explanation.

The same procedure applies when editing an arpeggio

pattern in Sequencer mode.

If you have entered this mode from the Combination mode,

the arpeggio pattern selected by the combination will be

affected by your editing.

1. In Combination mode, select a combination that uses

the arpeggio pattern that you wish to edit.

For this example, select a combination where both

arpeggiators A and B are assigned.

2. Press the ARP button to turn on the arpeggiator (the

button will light up).

Even if the arpeggiator had been turned off when you

moved here, you can use the ARP button to turn it on.

However, if Arpeggiator Run A or B are not checked,

and if Arpeggiator Assign, is set to off, then the

arpeggiator will not function.

3. Select the ARP PATTERN> SETUP page.

4. Press the ENTER button at Arpeggio Select A or B to

specify the arpeggiator that you want to edit.

If this is A, your editing will apply to the parameters and

user arpeggio pattern of arpeggiator A.

If this is B, your editing will apply to the parameters and

user arpeggio pattern of arpeggiator B.

5. Switch between arpeggiators A and B, and edit their

respective user arpeggio patterns.

If you want to stop one of the arpeggiators, return to

Combination mode, access the COMBI> ARP page and

turn Arpeggiator Run off.

6. To modify the name of a user arpeggio pattern, use the

“Rename Arpeggio Pattern” function. (see page 179 of

the Parameter Guide)

7. If you wish to save the edited user arpeggio pattern in

internal memory, you must write the user arpeggio

pattern.

In this case, both user arpeggio patterns will be written

simultaneously. If you turn off the power without writing,

the edited contents will be lost.

8. If you wish to save the state of the combination at the

same time, return to Combination mode and write the

combination. (see page 122)

Note: When editing a user arpeggio pattern, pay attention to

the global MIDI channel, the channel of each track, and the

arpeggiator assignments, and make sure that the arpeggiator

you are hearing is the pattern that you wish to edit.

Regarding arpeggiator

synchronization

“Key Sync.” parameter

The timing of the arpeggiator notes depends on the state of

the arpeggiator Key Sync. check box.

If this box is checked, the arpeggiator will start running at

the first note-on that occurs after you’ve taken your hands

completely off the keyboard.

If this box is unchecked, the arpeggiator will run in

synchronization with the internal/external MIDI clock.

Below, we will explain how synchronization occurs when

the Key Sync. check box is not checked (Synchronization

with Song Start and with MIDI realtime Start messages are

excluded).

Synchronization between arpeggiators

A and B

In Combination and Sequencer modes, the two arpeggiators

can run simultaneously. In this case, if one arpeggiator is

already running, and you then run the other arpeggiator (with

“Key Sync.” unchecked), the second arpeggiator will

synchronize to the “ (Tempo)” based on the first

arpeggiator.

If Key Sync. is checked, arpeggiators A and B will run

independently, each at their own tempo.

Synchronization with the drum track

If you want the arpeggiator to synchronize to the drum track

pattern that’s currently playing, uncheck the Key Sync.

setting. In this case, the arpeggiator will synchronize to the

beat of the drum track pattern that’s currently playing.

Note: If you want the drum track pattern to synchronize to

the arpeggiator that’s currently running, turn on the “Sync”

setting (the Trigger parameter of the DRUM TRACK>

PATTERN page of each mode).

Synchronizing with the step sequencer

If you want the arpeggiator to synchronize with the loop

pattern being played by the step sequencer, clear the Key

Sync check box. In this case, the arpeggiator will

synchronize with the beat based on the loop pattern that’s

currently playing.

Synchronization between the arpeggiator

and sequencer in Sequencer mode

If song playback is stopped

• The arpeggiator will synchronize to the “ (Tempo)”

based on the internal MIDI clock timing.

While playing back or recording a song

• The arpeggiator will synchronize to the beat based on the

timing of the song.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info