Bedienungsanleitung Korg Kross 2 (Seite 112 von 152) (Englisch)

707348

112

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Audio recorder

106

Exporting a WAVE file

A multitrack-recorded audio song can be exported as a

WAVE file to the KORG/KROSS2/DATA folder of the SD

card.

This lets you use your audio player to listen to an audio song

produced on the KROSS, or to load the song into your DAW.

• File format: WAVE format uncompressed linear PCM

• Sample bit depth: 16-bit

• Sampling frequency: 48 kHz

Number of characters in file name: The first eight characters

are shown

Export procedure

1. In the audio recorder setup window, select the audio

song that you want to export.

2. Choose the Export function to access the dialog box.

3. If you want to rename the file, access the text dialog

box and enter a name.

4. If you want to adjust the audio level of the song when

exporting it, specify Level Adjust.

5. Press the MENU (OK) button to execute the export

function.

The selected audio song will be exported as a WAVE file.

The progress of execution is shown by a progress bar in

the display.

The WAVE file will be created in the KORG/KROSS2/

DATA folder of the SD card.

Note: This may take some time, depending on the length

of the song.

During the export procedure, you can cancel by pressing

the FUNCTION (ABORT) button..

Adjusting the volume

You can use the following methods to adjust the volume of

imported data or of an already-recorded audio song.

If the volume of the imported data is too loud so that it

drowns out the performance of the KROSS, or if multi-track

recording has caused the volume to overload so that no more

can be overdubbed, it is helpful to adjust the volume by

using the following functions.

You can make the following adjustments.

• Set Play Level function: Temporarily lowers the

playback volume of audio songs.

Note: This will change the volume of all audio songs.

• Adjust Audio Level function: Applies attenuation

processing to the audio song, creating a new song.

Tip: Use this function if you want to individually adjust

the volume of each audio song.

• Level Adjust: Use the Level Adjust setting during Import

or Export.

About the Set Play Level and Adjust Audio

Level functions

In the Set Play Level function dialog box, setting the Level

to anything other than 0 dB will cause the audio song to play

back at a volume that is lower by the level you specified.

This function is convenient when you want to adjust the

volume balance between the audio song and your keyboard

performance.

Note: The Set Play Level setting applies to all audio songs.

At this time, the following message will appear. Please note

this if you’re overdubbing with the audio song playback

level lowered.

NOTICE: Overdubbing with this Level setting will

attenuate the sections of previous takes by the same

amount. Use ADJ. LVL to adjust the Audio Song and

avoid uneven audio level.

With this Level setting, if you overdub a region of the song

while playing back the previous take, the volume of the

previous take will be lowered only for the recorded region.

To avoid this problem of lowered volume, use ADJ. LVL to

adjust the audio song level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info