Bedienungsanleitung Korg Kross 2 (Seite 111 von 152) (Englisch)

707348

111

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Convenient functions for playback and recording Loop playback

105

2. Press the AUDIO REC (play/pause) button to

start playback. (AUDIO REC (play/pause)

button: lit green)

3. Slightly earlier than the point where you want to start

overdubbing, press the MENU (Rec Control )

button to enter the record-standby condition.

(AUDIO REC (play/pause) button: blinking

orange)

4. Sing the chorus part. Recording will start

automatically in response to the input.

When you overdub using this method, the audio input from

0.2 seconds earlier than the moment you started recording

will actually be recorded. This lets you overdub without

losing the beginning of the chorus or guitar phrase.

Tip: This Auto (Auto Rec Start) setting can be stored in the

GLOBAL> PREF 2 page as the default setting.

Loop playback

There’s a loop playback function that lets you repeatedly

play a specified region (A–B) of an audio song.

Note: The loop play on/off setting and the specified time are

saved individually for each audio song.

This setting will be saved to the SD card when you

switch to a different audio song or when you turn off the

power. If you remove the SD card immediately after

select the setting, the setting will not be saved.

Using loop play

If you add a check mark to LOOP to turn it on, the playback

will loop.

To specify the loop region, set the point where looping will

start (point A) and end (point B).

Note: The interval between points A and B will be at least

three seconds.

It’s not possible to record while LOOP has a check

mark. Nor is it possible to add a check mark to LOOP

during recording.

Setting the current time location as a point

There’s a convenient function that lets you directly specify

the current time location as one of the points. Move the cursor

to A or B, and press the ENTER button during playback; the

current time location will be specified as a point.

Note: If you use this method to specify the time location of a

point, the location will be specified with an accuracy of

within one second.

Pad audio play

You can assign a recorded audio song to a pad and play it

back. (→ p.109)

Importing or exporting WAVE files

Importing

You can import a WAVE file into the audio recorder, and

play it or overdub onto it.

The following files can be imported.

• File format: WAVE format uncompressed linear PCM

• Sample bit depth: 16-bit

• Sampling frequency: 44.1 kHz or 48 kHz, stereo files

Number of characters in file name: The first eight characters

are shown

Note: Since 44.1 kHz WAVE files will be converted into 48

kHz as they are imported into the KROSS, a small amount of

time may be required.

Import procedure

1. Using your computer, copy the WAVE file that you

want to import into the KORG/KROSS2/DATA folder

of an SD card that was formatted by the KROSS.

2. In the audio recorder setup screen, open the audio

song list.

3. The WAVE file that you saved on the SD card in step 1

is shown at the bottom; select the WAVE file that you

want to import, and press ENTER to access the dialog

box.

Note: As an alternative to steps 2 and 3, you can open the

same dialog box by using the MEDIA>FILE page to

select the WAVE file that you want to import, and then

executing the Load Selected function.

4. If you want to rename the song, access the text dialog

box and enter a name.

5. If the volume of the file you’re importing should be

adjusted beforehand, specify Level Adjust.

Note: After importing, you can adjust the playback

volume of the audio recorder, or apply an individual

volume adjustment to each audio song. (see “Adjusting

the volume” on page 106)

6. Press the MENU (OK) button to execute the import

function.

The selected WAVE file will be loaded in KROSS audio

song format. The progress of execution is shown by a

progress bar in the display.

Note: This may take some time depending on the type of

file, etc.

During the import procedure, you can cancel by pressing

the FUNCTION (ABORT) button.

7. In the audio recorder setup window, select the song

that you imported, and play it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info