Bedienungsanleitung Korg Kross 2 (Seite 109 von 152) (Englisch)

707348

109

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Recording and playing audio Playing back an audio song

103

button to select the AUDIO IN 1 row, and use KNOB 2 to

make adjustments.

6. Hold down the EXIT button ( ) and press the

AUDIO REC (play/pause) button ( ) to

open the AUDIO RECORDER SETUP window.

7. Select the audio song that you want to record.

8. Press the MENU (Rec Control ) button to enter

the record-standby condition.

9. When you press the MENU (Rec Control ) button

or the AUDIO REC (play/pause) button,

recording starts.

10.To stop recording, press the PAGE+ (Stop/Reset )

button. When you stop recording, you automatically

return to the time location at which recording started.

Note: For details on the screen indications and operations

during recording, refer to “Recording the performance of the

KROSS”

Direct Send

Direct Send is a parameter that specifies whether the

external audio input sound is mixed with the performance of

the KROSS during recording. For example if you're

rehearsing in the studio, you could record only the band's

performance while you play the KROSS.

Direct Send off: The audio input and the KROSS's

performance are mixed and recorded.

Direct Send on: Only the audio input is recorded. The sound

of the KROSS's performance is not mixed. (In this case, the

audio input sound is not output from audio out.)

If you want to record only the external audio input sound,

turn Direct Send on in step 4 of "Recording an external audio

input."

Playing back an audio song

To play back an audio song, press the AUDIO REC

(play/pause) button. Whether you’re in Program,

Combination, or Sequencer mode, you can play back

regardless of the mode you’re in.

1. Select the audio song that you want to play back.

Hold down the EXIT button ( ) and press the

AUDIO REC (play/pause) button ( ) to

access the AUDIO RECORDER SETUP page.

Move the cursor to the audio song, and use the VALUE

dial etc. to select the song you want.

2. Press the PAGE+ (Stop/Reset ) button to move to

the beginning of the sound.

3. Press the AUDIO REC (play/pause) button to

play back the audio song (green LED lit).

4. Press the AUDIO REC (play/pause) button to

pause (green LED blinking).

5. Press the AUDIO REC (play/pause) button once

again to resume playback (green LED lit).

6. Press the PAGE+ (Stop/Reset ) button to stop

playback and return the location to the beginning

(AUDIO REC (play/pause) button LED unlit).

Moving the playback location

For details on how to move the playback location of an audio

song, please see “Locate” on page 100.

Multi-track recording

SD card usage during multi-track recording

When you perform multi-track recording, the audio recorder

stores additional data on the SD card in proportion to the

recording time (see page 99). If you intend to use the audio

recorder for multi-track recording, you should use an SD

card with plenty of capacity.

Multi-track recording procedure

To perform multi-track recording, select an audio song,

move the time location to the place where you want to start

(whether at the beginning or in the middle of the song),

switch sounds or audio input sources if necessary, and repeat

the steps described in “Recording the performance of the

KROSS” on page 101.

Tip: If you want to change the volume when you’re

repeatedly recording the sound of the KROSS, you can use

the Hold function of Program mode or Combination mode to

adjust the balance. (see pages 32, 48)

In this example, we’ll explain how to record a specific

region starting in the middle of the song.

1. Select the song on which you want to multi-track

record.

Hold down the EXIT button ( ) and press the

AUDIO REC (play/pause) button ( ) to

open the AUDIO RECORDER SETUP window. Use the

cursor buttons ◄►▲▼ to choose Audio Song, and use

the VALUE dial etc. to select a song.

2. Move to the location where you want to begin multi-

track recording.

For details on how to move, please see “Locate” on

page 100.

Tip: It’s a good idea to move to a point where you can

start playback slightly earlier than you begin recording.

3. Press the AUDIO REC (play/pause) button to

start playback. (AUDIO REC (play/pause)

button: lit green)

4. Press the MENU (Rec Control ) button to start

recording. (AUDIO REC (play/pause) button: lit

red)

Direct Send

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info